Setup and Config
Getting and Creating Projects
Basic Snapshotting
Branching and Merging
Sharing and Updating Projects
Inspection and Comparison
Patching
Debugging
External Systems
Server Admin
Guides
- gitattributes
- Command-line interface conventions
- Everyday Git
- Frequently Asked Questions (FAQ)
- Glossary
- Hooks
- gitignore
- gitmodules
- Revisions
- Submodules
- Tutorial
- Workflows
- All guides...
Administration
Plumbing Commands
- 2.46.1 → 2.47.1 no changes
- 2.46.0 07/29/24
- 2.43.3 → 2.45.2 no changes
- 2.43.2 02/13/24
- 2.43.1 02/09/24
- 2.43.0 11/20/23
- 2.42.1 → 2.42.3 no changes
- 2.42.0 08/21/23
- 2.41.1 → 2.41.2 no changes
- 2.41.0 06/01/23
- 2.39.1 → 2.40.3 no changes
- 2.39.0 12/12/22
- 2.38.1 → 2.38.5 no changes
- 2.38.0 10/02/22
- 2.37.1 → 2.37.7 no changes
- 2.37.0 06/27/22
- 2.35.1 → 2.36.6 no changes
- 2.35.0 01/24/22
- 2.34.1 → 2.34.8 no changes
- 2.34.0 11/15/21
- 2.33.1 → 2.33.8 no changes
- 2.33.0 08/16/21
- 2.31.1 → 2.32.7 no changes
- 2.31.0 03/15/21
- 2.30.1 → 2.30.9 no changes
- 2.30.0 12/27/20
- 2.29.1 → 2.29.3 no changes
- 2.29.0 10/19/20
- 2.28.1 no changes
- 2.28.0 07/27/20
- 2.26.1 → 2.27.1 no changes
- 2.26.0 03/22/20
- 2.25.1 → 2.25.5 no changes
- 2.25.0 01/13/20
- 2.24.1 → 2.24.4 no changes
- 2.24.0 11/04/19
- 2.23.1 → 2.23.4 no changes
- 2.23.0 08/16/19
Summary
This is a tutorial demonstrating the end-to-end workflow of creating a change to the Git tree, sending it for review, and making changes based on comments.
Prerequisites
This tutorial assumes you’re already fairly familiar with using Git to manage source code. The Git workflow steps will largely remain unexplained.
Related Reading
This tutorial aims to summarize the following documents, but the reader may find useful additional context:
-
Documentation/SubmittingPatches
-
Documentation/howto/new-command.txt
Getting Help
If you get stuck, you can seek help in the following places.
git@vger.kernel.org
This is the main Git project mailing list where code reviews, version announcements, design discussions, and more take place. Those interested in contributing are welcome to post questions here. The Git list requires plain-text-only emails and prefers inline and bottom-posting when replying to mail; you will be CC’d in all replies to you. Optionally, you can subscribe to the list by sending an email to majordomo@vger.kernel.org with "subscribe git" in the body. The archive of this mailing list is available to view in a browser.
git-mentoring@googlegroups.com
This mailing list is targeted to new contributors and was created as a place to post questions and receive answers outside of the public eye of the main list. Veteran contributors who are especially interested in helping mentor newcomers are present on the list. In order to avoid search indexers, group membership is required to view messages; anyone can join and no approval is required.
#git-devel on Libera Chat
This IRC channel is for conversations between Git contributors. If someone is currently online and knows the answer to your question, you can receive help in real time. Otherwise, you can read the scrollback to see whether someone answered you. IRC does not allow offline private messaging, so if you try to private message someone and then log out of IRC, they cannot respond to you. It’s better to ask your questions in the channel so that you can be answered if you disconnect and so that others can learn from the conversation.
Getting Started
Clone the Git Repository
Git is mirrored in a number of locations. Clone the repository from one of them; https://git-scm.com/downloads suggests one of the best places to clone from is the mirror on GitHub.
$ git clone https://github.com/git/git git $ cd git
Installing Dependencies
To build Git from source, you need to have a handful of dependencies installed
on your system. For a hint of what’s needed, you can take a look at
INSTALL
, paying close attention to the section about Git’s dependencies on
external programs and libraries. That document mentions a way to "test-drive"
our freshly built Git without installing; that’s the method we’ll be using in
this tutorial.
Make sure that your environment has everything you need by building your brand new clone of Git from the above step:
$ make
Note
|
The Git build is parallelizable. -j# is not included above but you can
use it as you prefer, here and elsewhere.
|
Identify Problem to Solve
In this tutorial, we will add a new command, git psuh
, short for “Pony Saying
‘Um, Hello”’ - a feature which has gone unimplemented despite a high frequency
of invocation during users' typical daily workflow.
(We’ve seen some other effort in this space with the implementation of popular
commands such as sl
.)
Set Up Your Workspace
Let’s start by making a development branch to work on our changes. Per
Documentation/SubmittingPatches
, since a brand new command is a new feature,
it’s fine to base your work on master
. However, in the future for bugfixes,
etc., you should check that document and base it on the appropriate branch.
For the purposes of this document, we will base all our work on the master
branch of the upstream project. Create the psuh
branch you will use for
development like so:
$ git checkout -b psuh origin/master
We’ll make a number of commits here in order to demonstrate how to send a topic with multiple patches up for review simultaneously.
Code It Up!
Note
|
A reference implementation can be found at https://github.com/nasamuffin/git/tree/psuh. |
Adding a New Command
Lots of the subcommands are written as builtins, which means they are
implemented in C and compiled into the main git
executable. Implementing the
very simple psuh
command as a built-in will demonstrate the structure of the
codebase, the internal API, and the process of working together as a contributor
with the reviewers and maintainer to integrate this change into the system.
Built-in subcommands are typically implemented in a function named "cmd_"
followed by the name of the subcommand, in a source file named after the
subcommand and contained within builtin/
. So it makes sense to implement your
command in builtin/psuh.c
. Create that file, and within it, write the entry
point for your command in a function matching the style and signature:
int cmd_psuh(int argc, const char **argv, const char *prefix)
We’ll also need to add the declaration of psuh; open up builtin.h
, find the
declaration for cmd_pull
, and add a new line for psuh
immediately before it,
in order to keep the declarations alphabetically sorted:
int cmd_psuh(int argc, const char **argv, const char *prefix);
Be sure to #include "builtin.h"
in your psuh.c
. You’ll also need to
#include "gettext.h"
to use functions related to printing output text.
Go ahead and add some throwaway printf to the cmd_psuh
function. This is a
decent starting point as we can now add build rules and register the command.
Note
|
Your throwaway text, as well as much of the text you will be adding over
the course of this tutorial, is user-facing. That means it needs to be
localizable. Take a look at po/README under "Marking strings for translation".
Throughout the tutorial, we will mark strings for translation as necessary; you
should also do so when writing your user-facing commands in the future.
|
int cmd_psuh(int argc, const char **argv, const char *prefix) { printf(_("Pony saying hello goes here.\n")); return 0; }
Let’s try to build it. Open Makefile
, find where builtin/pull.o
is added
to BUILTIN_OBJS
, and add builtin/psuh.o
in the same way next to it in
alphabetical order. Once you’ve done so, move to the top-level directory and
build simply with make
. Also add the DEVELOPER=1
variable to turn on
some additional warnings:
$ echo DEVELOPER=1 >config.mak $ make
Note
|
When you are developing the Git project, it’s preferred that you use the
DEVELOPER flag; if there’s some reason it doesn’t work for you, you can turn
it off, but it’s a good idea to mention the problem to the mailing list.
|
Great, now your new command builds happily on its own. But nobody invokes it. Let’s change that.
The list of commands lives in git.c
. We can register a new command by adding
a cmd_struct
to the commands[]
array. struct cmd_struct
takes a string
with the command name, a function pointer to the command implementation, and a
setup option flag. For now, let’s keep mimicking push
. Find the line where
cmd_push
is registered, copy it, and modify it for cmd_psuh
, placing the new
line in alphabetical order (immediately before cmd_pull
).
The options are documented in builtin.h
under "Adding a new built-in." Since
we hope to print some data about the user’s current workspace context later,
we need a Git directory, so choose RUN_SETUP
as your only option.
Go ahead and build again. You should see a clean build, so let’s kick the tires
and see if it works. There’s a binary you can use to test with in the
bin-wrappers
directory.
$ ./bin-wrappers/git psuh
Check it out! You’ve got a command! Nice work! Let’s commit this.
git status
reveals modified Makefile
, builtin.h
, and git.c
as well as
untracked builtin/psuh.c
and git-psuh
. First, let’s take care of the binary,
which should be ignored. Open .gitignore
in your editor, find /git-pull
, and
add an entry for your new command in alphabetical order:
... /git-prune-packed /git-psuh /git-pull /git-push /git-quiltimport /git-range-diff ...
Checking git status
again should show that git-psuh
has been removed from
the untracked list and .gitignore
has been added to the modified list. Now we
can stage and commit:
$ git add Makefile builtin.h builtin/psuh.c git.c .gitignore $ git commit -s
You will be presented with your editor in order to write a commit message. Start
the commit with a 50-column or less subject line, including the name of the
component you’re working on, followed by a blank line (always required) and then
the body of your commit message, which should provide the bulk of the context.
Remember to be explicit and provide the "Why" of your change, especially if it
couldn’t easily be understood from your diff. When editing your commit message,
don’t remove the Signed-off-by
trailer which was added by -s
above.
psuh: add a built-in by popular demand Internal metrics indicate this is a command many users expect to be present. So here's an implementation to help drive customer satisfaction and engagement: a pony which doubtfully greets the user, or, a Pony Saying "Um, Hello" (PSUH). This commit message is intentionally formatted to 72 columns per line, starts with a single line as "commit message subject" that is written as if to command the codebase to do something (add this, teach a command that). The body of the message is designed to add information about the commit that is not readily deduced from reading the associated diff, such as answering the question "why?". Signed-off-by: A U Thor <author@example.com>
Go ahead and inspect your new commit with git show
. "psuh:" indicates you
have modified mainly the psuh
command. The subject line gives readers an idea
of what you’ve changed. The sign-off line (-s
) indicates that you agree to
the Developer’s Certificate of Origin 1.1 (see the
Documentation/SubmittingPatches
[[dco]] header).
For the remainder of the tutorial, the subject line only will be listed for the sake of brevity. However, fully-fleshed example commit messages are available on the reference implementation linked at the top of this document.
Implementation
It’s probably useful to do at least something besides printing out a string. Let’s start by having a look at everything we get.
Modify your cmd_psuh
implementation to dump the args you’re passed, keeping
existing printf()
calls in place:
int i; ... printf(Q_("Your args (there is %d):\n", "Your args (there are %d):\n", argc), argc); for (i = 0; i < argc; i++) printf("%d: %s\n", i, argv[i]); printf(_("Your current working directory:\n<top-level>%s%s\n"), prefix ? "/" : "", prefix ? prefix : "");
Build and try it. As you may expect, there’s pretty much just whatever we give
on the command line, including the name of our command. (If prefix
is empty
for you, try cd Documentation/ && ../bin-wrappers/git psuh
). That’s not so
helpful. So what other context can we get?
Add a line to #include "config.h"
. Then, add the following bits to the
function body:
const char *cfg_name; ... git_config(git_default_config, NULL); if (git_config_get_string_tmp("user.name", &cfg_name) > 0) printf(_("No name is found in config\n")); else printf(_("Your name: %s\n"), cfg_name);
git_config()
will grab the configuration from config files known to Git and
apply standard precedence rules. git_config_get_string_tmp()
will look up
a specific key ("user.name") and give you the value. There are a number of
single-key lookup functions like this one; you can see them all (and more info
about how to use git_config()
) in Documentation/technical/api-config.txt
.
You should see that the name printed matches the one you see when you run:
$ git config --get user.name
Great! Now we know how to check for values in the Git config. Let’s commit this too, so we don’t lose our progress.
$ git add builtin/psuh.c $ git commit -sm "psuh: show parameters & config opts"
Note
|
Again, the above is for sake of brevity in this tutorial. In a real change
you should not use -m but instead use the editor to write a meaningful
message.
|
Still, it’d be nice to know what the user’s working context is like. Let’s see
if we can print the name of the user’s current branch. We can mimic the
git status
implementation; the printer is located in wt-status.c
and we can
see that the branch is held in a struct wt_status
.
wt_status_print()
gets invoked by cmd_status()
in builtin/commit.c
.
Looking at that implementation we see the status config being populated like so:
status_init_config(&s, git_status_config);
But as we drill down, we can find that status_init_config()
wraps a call
to git_config()
. Let’s modify the code we wrote in the previous commit.
Be sure to include the header to allow you to use struct wt_status
:
#include "wt-status.h"
Then modify your cmd_psuh
implementation to declare your struct wt_status
,
prepare it, and print its contents:
struct wt_status status; ... wt_status_prepare(the_repository, &status); git_config(git_default_config, &status); ... printf(_("Your current branch: %s\n"), status.branch);
Run it again. Check it out - here’s the (verbose) name of your current branch!
Let’s commit this as well.
$ git add builtin/psuh.c $ git commit -sm "psuh: print the current branch"
Now let’s see if we can get some info about a specific commit.
Luckily, there are some helpers for us here. commit.h
has a function called
lookup_commit_reference_by_name
to which we can simply provide a hardcoded
string; pretty.h
has an extremely handy pp_commit_easy()
call which doesn’t
require a full format object to be passed.
Add the following includes:
#include "commit.h" #include "pretty.h"
Then, add the following lines within your implementation of cmd_psuh()
near
the declarations and the logic, respectively.
struct commit *c = NULL; struct strbuf commitline = STRBUF_INIT; ... c = lookup_commit_reference_by_name("origin/master"); if (c != NULL) { pp_commit_easy(CMIT_FMT_ONELINE, c, &commitline); printf(_("Current commit: %s\n"), commitline.buf); }
The struct strbuf
provides some safety belts to your basic char*
, one of
which is a length member to prevent buffer overruns. It needs to be initialized
nicely with STRBUF_INIT
. Keep it in mind when you need to pass around char*
.
lookup_commit_reference_by_name
resolves the name you pass it, so you can play
with the value there and see what kind of things you can come up with.
pp_commit_easy
is a convenience wrapper in pretty.h
that takes a single
format enum shorthand, rather than an entire format struct. It then
pretty-prints the commit according to that shorthand. These are similar to the
formats available with --pretty=FOO
in many Git commands.
Build it and run, and if you’re using the same name in the example, you should
see the subject line of the most recent commit in origin/master
that you know
about. Neat! Let’s commit that as well.
$ git add builtin/psuh.c $ git commit -sm "psuh: display the top of origin/master"
Adding Documentation
Awesome! You’ve got a fantastic new command that you’re ready to share with the community. But hang on just a minute - this isn’t very user-friendly. Run the following:
$ ./bin-wrappers/git help psuh
Your new command is undocumented! Let’s fix that.
Take a look at Documentation/git-*.txt
. These are the manpages for the
subcommands that Git knows about. You can open these up and take a look to get
acquainted with the format, but then go ahead and make a new file
Documentation/git-psuh.txt
. Like with most of the documentation in the Git
project, help pages are written with AsciiDoc (see CodingGuidelines, "Writing
Documentation" section). Use the following template to fill out your own
manpage:
git-psuh(1) =========== NAME ---- git-psuh - Delight users' typo with a shy horse SYNOPSIS -------- [verse] 'git-psuh [<arg>...]' DESCRIPTION ----------- ... OPTIONS[[OPTIONS]] ------------------ ... OUTPUT ------ ... GIT --- Part of the git[1] suite
The most important pieces of this to note are the file header, underlined by =, the NAME section, and the SYNOPSIS, which would normally contain the grammar if your command took arguments. Try to use well-established manpage headers so your documentation is consistent with other Git and UNIX manpages; this makes life easier for your user, who can skip to the section they know contains the information they need.
Note
|
Before trying to build the docs, make sure you have the package asciidoc
installed.
|
Now that you’ve written your manpage, you’ll need to build it explicitly. We convert your AsciiDoc to troff which is man-readable like so:
$ make all doc $ man Documentation/git-psuh.1
or
$ make -C Documentation/ git-psuh.1 $ man Documentation/git-psuh.1
While this isn’t as satisfying as running through git help
, you can at least
check that your help page looks right.
You can also check that the documentation coverage is good (that is, the project
sees that your command has been implemented as well as documented) by running
make check-docs
from the top-level.
Go ahead and commit your new documentation change.
Adding Usage Text
Try and run ./bin-wrappers/git psuh -h
. Your command should crash at the end.
That’s because -h
is a special case which your command should handle by
printing usage.
Take a look at Documentation/technical/api-parse-options.txt
. This is a handy
tool for pulling out options you need to be able to handle, and it takes a
usage string.
In order to use it, we’ll need to prepare a NULL-terminated array of usage
strings and a builtin_psuh_options
array.
Add a line to #include "parse-options.h"
.
At global scope, add your array of usage strings:
static const char * const psuh_usage[] = { N_("git psuh [<arg>...]"), NULL, };
Then, within your cmd_psuh()
implementation, we can declare and populate our
option
struct. Ours is pretty boring but you can add more to it if you want to
explore parse_options()
in more detail:
struct option options[] = { OPT_END() };
Finally, before you print your args and prefix, add the call to
parse-options()
:
argc = parse_options(argc, argv, prefix, options, psuh_usage, 0);
This call will modify your argv
parameter. It will strip the options you
specified in options
from argv
and the locations pointed to from options
entries will be updated. Be sure to replace your argc
with the result from
parse_options()
, or you will be confused if you try to parse argv
later.
It’s worth noting the special argument --
. As you may be aware, many Unix
commands use --
to indicate "end of named parameters" - all parameters after
the --
are interpreted merely as positional arguments. (This can be handy if
you want to pass as a parameter something which would usually be interpreted as
a flag.) parse_options()
will terminate parsing when it reaches --
and give
you the rest of the options afterwards, untouched.
Now that you have a usage hint, you can teach Git how to show it in the general
command list shown by git help git
or git help -a
, which is generated from
command-list.txt
. Find the line for git-pull so you can add your git-psuh
line above it in alphabetical order. Now, we can add some attributes about the
command which impacts where it shows up in the aforementioned help commands. The
top of command-list.txt
shares some information about what each attribute
means; in those help pages, the commands are sorted according to these
attributes. git psuh
is user-facing, or porcelain - so we will mark it as
"mainporcelain". For "mainporcelain" commands, the comments at the top of
command-list.txt
indicate we can also optionally add an attribute from another
list; since git psuh
shows some information about the user’s workspace but
doesn’t modify anything, let’s mark it as "info". Make sure to keep your
attributes in the same style as the rest of command-list.txt
using spaces to
align and delineate them:
git-prune-packed plumbingmanipulators git-psuh mainporcelain info git-pull mainporcelain remote git-push mainporcelain remote
Build again. Now, when you run with -h
, you should see your usage printed and
your command terminated before anything else interesting happens. Great!
Go ahead and commit this one, too.
Testing
It’s important to test your code - even for a little toy command like this one. Moreover, your patch won’t be accepted into the Git tree without tests. Your tests should:
-
Illustrate the current behavior of the feature
-
Prove the current behavior matches the expected behavior
-
Ensure the externally-visible behavior isn’t broken in later changes
So let’s write some tests.
Related reading: t/README
Overview of Testing Structure
The tests in Git live in t/
and are named with a 4-digit decimal number using
the schema shown in the Naming Tests section of t/README
.
Writing Your Test
Since this a toy command, let’s go ahead and name the test with t9999. However, as many of the family/subcmd combinations are full, best practice seems to be to find a command close enough to the one you’ve added and share its naming space.
Create a new file t/t9999-psuh-tutorial.sh
. Begin with the header as so (see
"Writing Tests" and "Source test-lib.sh" in t/README
):
#!/bin/sh test_description='git-psuh test This test runs git-psuh and makes sure it does not crash.' . ./test-lib.sh
Tests are framed inside of a test_expect_success
in order to output TAP
formatted results. Let’s make sure that git psuh
doesn’t exit poorly and does
mention the right animal somewhere:
test_expect_success 'runs correctly with no args and good output' ' git psuh >actual && grep Pony actual '
Indicate that you’ve run everything you wanted by adding the following at the bottom of your script:
test_done
Make sure you mark your test script executable:
$ chmod +x t/t9999-psuh-tutorial.sh
You can get an idea of whether you created your new test script successfully
by running make -C t test-lint
, which will check for things like test number
uniqueness, executable bit, and so on.
Running Locally
Let’s try and run locally:
$ make $ cd t/ && prove t9999-psuh-tutorial.sh
You can run the full test suite and ensure git-psuh
didn’t break anything:
$ cd t/ $ prove -j$(nproc) --shuffle t[0-9]*.sh
Note
|
You can also do this with make test or use any testing harness which can
speak TAP. prove can run concurrently. shuffle randomizes the order the
tests are run in, which makes them resilient against unwanted inter-test
dependencies. prove also makes the output nicer.
|
Go ahead and commit this change, as well.
Getting Ready to Share: Anatomy of a Patch Series
You may have noticed already that the Git project performs its code reviews via emailed patches, which are then applied by the maintainer when they are ready and approved by the community. The Git project does not accept contributions from pull requests, and the patches emailed for review need to be formatted a specific way.
Before taking a look at how to convert your commits into emailed patches, let’s analyze what the end result, a "patch series", looks like. Here is an example of the summary view for a patch series on the web interface of the Git mailing list archive:
2022-02-18 18:40 [PATCH 0/3] libify reflog John Cai via GitGitGadget 2022-02-18 18:40 ` [PATCH 1/3] reflog: libify delete reflog function and helpers John Cai via GitGitGadget 2022-02-18 19:10 ` Ævar Arnfjörð Bjarmason [this message] 2022-02-18 19:39 ` Taylor Blau 2022-02-18 19:48 ` Ævar Arnfjörð Bjarmason 2022-02-18 19:35 ` Taylor Blau 2022-02-21 1:43 ` John Cai 2022-02-21 1:50 ` Taylor Blau 2022-02-23 19:50 ` John Cai 2022-02-18 20:00 ` // other replies elided 2022-02-18 18:40 ` [PATCH 2/3] reflog: call reflog_delete from reflog.c John Cai via GitGitGadget 2022-02-18 19:15 ` Ævar Arnfjörð Bjarmason 2022-02-18 20:26 ` Junio C Hamano 2022-02-18 18:40 ` [PATCH 3/3] stash: call reflog_delete from reflog.c John Cai via GitGitGadget 2022-02-18 19:20 ` Ævar Arnfjörð Bjarmason 2022-02-19 0:21 ` Taylor Blau 2022-02-22 2:36 ` John Cai 2022-02-22 10:51 ` Ævar Arnfjörð Bjarmason 2022-02-18 19:29 ` [PATCH 0/3] libify reflog Ævar Arnfjörð Bjarmason 2022-02-22 18:30 ` [PATCH v2 0/3] libify reflog John Cai via GitGitGadget 2022-02-22 18:30 ` [PATCH v2 1/3] stash: add test to ensure reflog --rewrite --updatref behavior John Cai via GitGitGadget 2022-02-23 8:54 ` Ævar Arnfjörð Bjarmason 2022-02-23 21:27 ` Junio C Hamano // continued
We can note a few things:
-
Each commit is sent as a separate email, with the commit message title as subject, prefixed with "[PATCH i/n]" for the i-th commit of an n-commit series.
-
Each patch is sent as a reply to an introductory email called the cover letter of the series, prefixed "[PATCH 0/n]".
-
Subsequent iterations of the patch series are labelled "PATCH v2", "PATCH v3", etc. in place of "PATCH". For example, "[PATCH v2 1/3]" would be the first of three patches in the second iteration. Each iteration is sent with a new cover letter (like "[PATCH v2 0/3]" above), itself a reply to the cover letter of the previous iteration (more on that below).
Note
|
A single-patch topic is sent with "[PATCH]", "[PATCH v2]", etc. without i/n numbering (in the above thread overview, no single-patch topic appears, though). |
The cover letter
In addition to an email per patch, the Git community also expects your patches to come with a cover letter. This is an important component of change submission as it explains to the community from a high level what you’re trying to do, and why, in a way that’s more apparent than just looking at your patches.
The title of your cover letter should be something which succinctly covers the purpose of your entire topic branch. It’s often in the imperative mood, just like our commit message titles. Here is how we’ll title our series:
Add the psuh command ---
The body of the cover letter is used to give additional context to reviewers. Be sure to explain anything your patches don’t make clear on their own, but remember that since the cover letter is not recorded in the commit history, anything that might be useful to future readers of the repository’s history should also be in your commit messages.
Here’s an example body for psuh
:
Our internal metrics indicate widespread interest in the command git-psuh - that is, many users are trying to use it, but finding it is unavailable, using some unknown workaround instead. The following handful of patches add the psuh command and implement some handy features on top of it. This patchset is part of the MyFirstContribution tutorial and should not be merged.
At this point the tutorial diverges, in order to demonstrate two different methods of formatting your patchset and getting it reviewed.
The first method to be covered is GitGitGadget, which is useful for those already familiar with GitHub’s common pull request workflow. This method requires a GitHub account.
The second method to be covered is git send-email
, which can give slightly
more fine-grained control over the emails to be sent. This method requires some
setup which can change depending on your system and will not be covered in this
tutorial.
Regardless of which method you choose, your engagement with reviewers will be
the same; the review process will be covered after the sections on GitGitGadget
and git send-email
.
Sending Patches via GitGitGadget
One option for sending patches is to follow a typical pull request workflow and send your patches out via GitGitGadget. GitGitGadget is a tool created by Johannes Schindelin to make life as a Git contributor easier for those used to the GitHub PR workflow. It allows contributors to open pull requests against its mirror of the Git project, and does some magic to turn the PR into a set of emails and send them out for you. It also runs the Git continuous integration suite for you. It’s documented at https://gitgitgadget.github.io/.
Forking git/git
on GitHub
Before you can send your patch off to be reviewed using GitGitGadget, you will need to fork the Git project and upload your changes. First thing - make sure you have a GitHub account.
Head to the GitHub mirror and look for the Fork button. Place your fork wherever you deem appropriate and create it.
Uploading to Your Own Fork
To upload your branch to your own fork, you’ll need to add the new fork as a
remote. You can use git remote -v
to show the remotes you have added already.
From your new fork’s page on GitHub, you can press "Clone or download" to get
the URL; then you need to run the following to add, replacing your own URL and
remote name for the examples provided:
$ git remote add remotename git@github.com:remotename/git.git
or to use the HTTPS URL:
$ git remote add remotename https://github.com/remotename/git/.git
Run git remote -v
again and you should see the new remote showing up.
git fetch remotename
(with the real name of your remote replaced) in order to
get ready to push.
Next, double-check that you’ve been doing all your development in a new branch
by running git branch
. If you didn’t, now is a good time to move your new
commits to their own branch.
As mentioned briefly at the beginning of this document, we are basing our work
on master
, so go ahead and update as shown below, or using your preferred
workflow.
$ git checkout master $ git pull -r $ git rebase master psuh
Finally, you’re ready to push your new topic branch! (Due to our branch and command name choices, be careful when you type the command below.)
$ git push remotename psuh
Now you should be able to go and check out your newly created branch on GitHub.
Sending a PR to GitGitGadget
In order to have your code tested and formatted for review, you need to start by
opening a Pull Request against gitgitgadget/git
. Head to
https://github.com/gitgitgadget/git and open a PR either with the "New pull
request" button or the convenient "Compare & pull request" button that may
appear with the name of your newly pushed branch.
Review the PR’s title and description, as they’re used by GitGitGadget respectively as the subject and body of the cover letter for your change. Refer to "The cover letter" above for advice on how to title your submission and what content to include in the description.
Note
|
For single-patch contributions, your commit message should already be meaningful and explain at a high level the purpose (what is happening and why) of your patch, so you usually do not need any additional context. In that case, remove the PR description that GitHub automatically generates from your commit message (your PR description should be empty). If you do need to supply even more context, you can do so in that space and it will be appended to the email that GitGitGadget will send, between the three-dash line and the diffstat (see Bonus Chapter: One-Patch Changes for how this looks once submitted). |
When you’re happy, submit your pull request.
Running CI and Getting Ready to Send
If it’s your first time using GitGitGadget (which is likely, as you’re using
this tutorial) then someone will need to give you permission to use the tool.
As mentioned in the GitGitGadget documentation, you just need someone who
already uses it to comment on your PR with /allow <username>
. GitGitGadget
will automatically run your PRs through the CI even without the permission given
but you will not be able to /submit
your changes until someone allows you to
use the tool.
Note
|
You can typically find someone who can /allow you on GitGitGadget by
either examining recent pull requests where someone has been granted /allow
(Search:
is:pr is:open "/allow"), in which case both the author and the person who
granted the /allow can now /allow you, or by inquiring on the
#git-devel IRC channel on Libera Chat
linking your pull request and asking for someone to /allow you.
|
If the CI fails, you can update your changes with git rebase -i
and push your
branch again:
$ git push -f remotename psuh
In fact, you should continue to make changes this way up until the point when
your patch is accepted into next
.
Sending Your Patches
Now that your CI is passing and someone has granted you permission to use
GitGitGadget with the /allow
command, sending out for review is as simple as
commenting on your PR with /submit
.
Updating With Comments
Skip ahead to Responding to Reviews for information on how to reply to review comments you will receive on the mailing list.
Once you have your branch again in the shape you want following all review comments, you can submit again:
$ git push -f remotename psuh
Next, go look at your pull request against GitGitGadget; you should see the CI
has been kicked off again. Now while the CI is running is a good time for you
to modify your description at the top of the pull request thread; it will be
used again as the cover letter. You should use this space to describe what
has changed since your previous version, so that your reviewers have some idea
of what they’re looking at. When the CI is done running, you can comment once
more with /submit
- GitGitGadget will automatically add a v2 mark to your
changes.
Sending Patches with git send-email
If you don’t want to use GitGitGadget, you can also use Git itself to mail your patches. Some benefits of using Git this way include finer grained control of subject line (for example, being able to use the tag [RFC PATCH] in the subject) and being able to send a “dry run” mail to yourself to ensure it all looks good before going out to the list.
Prerequisite: Setting Up git send-email
Configuration for send-email
can vary based on your operating system and email
provider, and so will not be covered in this tutorial, beyond stating that in
many distributions of Linux, git-send-email
is not packaged alongside the
typical git
install. You may need to install this additional package; there
are a number of resources online to help you do so. You will also need to
determine the right way to configure it to use your SMTP server; again, as this
configuration can change significantly based on your system and email setup, it
is out of scope for the context of this tutorial.
Preparing Initial Patchset
Sending emails with Git is a two-part process; before you can prepare the emails themselves, you’ll need to prepare the patches. Luckily, this is pretty simple:
$ git format-patch --cover-letter -o psuh/ --base=auto psuh@{u}..psuh
-
The
--cover-letter
option tellsformat-patch
to create a cover letter template for you. You will need to fill in the template before you’re ready to send - but for now, the template will be next to your other patches. -
The
-o psuh/
option tellsformat-patch
to place the patch files into a directory. This is useful becausegit send-email
can take a directory and send out all the patches from there. -
The
--base=auto
option tells the command to record the "base commit", on which the recipient is expected to apply the patch series. Theauto
value will causeformat-patch
to compute the base commit automatically, which is the merge base of tip commit of the remote-tracking branch and the specified revision range. -
The
psuh@{u}..psuh
option tellsformat-patch
to generate patches for the commits you created on thepsuh
branch since it forked from its upstream (which isorigin/master
if you followed the example in the "Set up your workspace" section). If you are already on thepsuh
branch, you can just say@{u}
, which means "commits on the current branch since it forked from its upstream", which is the same thing.
The command will make one patch file per commit. After you
run, you can go have a look at each of the patches with your favorite text
editor and make sure everything looks alright; however, it’s not recommended to
make code fixups via the patch file. It’s a better idea to make the change the
normal way using git rebase -i
or by adding a new commit than by modifying a
patch.
Note
|
Optionally, you can also use the --rfc flag to prefix your patch subject
with “[RFC PATCH]” instead of “[PATCH]”. RFC stands for “request for
comments” and indicates that while your code isn’t quite ready for submission,
you’d like to begin the code review process. This can also be used when your
patch is a proposal, but you aren’t sure whether the community wants to solve
the problem with that approach or not - to conduct a sort of design review. You
may also see on the list patches marked “WIP” - this means they are incomplete
but want reviewers to look at what they have so far. You can add this flag with
--subject-prefix=WIP .
|
Check and make sure that your patches and cover letter template exist in the directory you specified - you’re nearly ready to send out your review!
Preparing Email
Since you invoked format-patch
with --cover-letter
, you’ve already got a
cover letter template ready. Open it up in your favorite editor.
You should see a number of headers present already. Check that your From:
header is correct. Then modify your Subject:
(see above for
how to choose good title for your patch series):
Subject: [PATCH 0/7] Add the 'psuh' command
Make sure you retain the “[PATCH 0/X]” part; that’s what indicates to the Git community that this email is the beginning of a patch series, and many reviewers filter their email for this type of flag.
You’ll need to add some extra parameters when you invoke git send-email
to add
the cover letter.
Next you’ll have to fill out the body of your cover letter. Again, see above for what content to include.
The template created by git format-patch --cover-letter
includes a diffstat.
This gives reviewers a summary of what they’re in for when reviewing your topic.
The one generated for psuh
from the sample implementation looks like this:
Documentation/git-psuh.txt | 40 +++++++++++++++++++++ Makefile | 1 + builtin.h | 1 + builtin/psuh.c | 73 ++++++++++++++++++++++++++++++++++++++ git.c | 1 + t/t9999-psuh-tutorial.sh | 12 +++++++ 6 files changed, 128 insertions(+) create mode 100644 Documentation/git-psuh.txt create mode 100644 builtin/psuh.c create mode 100755 t/t9999-psuh-tutorial.sh
Finally, the letter will include the version of Git used to generate the patches. You can leave that string alone.
Sending Email
At this point you should have a directory psuh/
which is filled with your
patches and a cover letter. Time to mail it out! You can send it like this:
$ git send-email --to=target@example.com psuh/*.patch
Note
|
Check git help send-email for some other options which you may find
valuable, such as changing the Reply-to address or adding more CC and BCC lines.
|
Note
|
When you are sending a real patch, it will go to git@vger.kernel.org - but please don’t send your patchset from the tutorial to the real mailing list! For now, you can send it to yourself, to make sure you understand how it will look. |
After you run the command above, you will be presented with an interactive
prompt for each patch that’s about to go out. This gives you one last chance to
edit or quit sending something (but again, don’t edit code this way). Once you
press y
or a
at these prompts your emails will be sent! Congratulations!
Awesome, now the community will drop everything and review your changes. (Just kidding - be patient!)
Sending v2
This section will focus on how to send a v2 of your patchset. To learn what should go into v2, skip ahead to Responding to Reviews for information on how to handle comments from reviewers.
We’ll reuse our psuh
topic branch for v2. Before we make any changes, we’ll
mark the tip of our v1 branch for easy reference:
$ git checkout psuh $ git branch psuh-v1
Refine your patch series by using git rebase -i
to adjust commits based upon
reviewer comments. Once the patch series is ready for submission, generate your
patches again, but with some new flags:
$ git format-patch -v2 --cover-letter -o psuh/ --range-diff master..psuh-v1 master..
The --range-diff master..psuh-v1
parameter tells format-patch
to include a
range-diff between psuh-v1
and psuh
in the cover letter (see
git-range-diff[1]). This helps tell reviewers about the differences
between your v1 and v2 patches.
The -v2
parameter tells format-patch
to output your patches
as version "2". For instance, you may notice that your v2 patches are
all named like v2-000n-my-commit-subject.patch
. -v2
will also format
your patches by prefixing them with "[PATCH v2]" instead of "[PATCH]",
and your range-diff will be prefaced with "Range-diff against v1".
After you run this command, format-patch
will output the patches to the psuh/
directory, alongside the v1 patches. Using a single directory makes it easy to
refer to the old v1 patches while proofreading the v2 patches, but you will need
to be careful to send out only the v2 patches. We will use a pattern like
psuh/v2-*.patch
(not psuh/*.patch
, which would match v1 and v2 patches).
Edit your cover letter again. Now is a good time to mention what’s different between your last version and now, if it’s something significant. You do not need the exact same body in your second cover letter; focus on explaining to reviewers the changes you’ve made that may not be as visible.
You will also need to go and find the Message-ID of your previous cover letter.
You can either note it when you send the first series, from the output of git
send-email
, or you can look it up on the
mailing list. Find your cover letter in the
archives, click on it, then click "permalink" or "raw" to reveal the Message-ID
header. It should match:
Message-ID: <foo.12345.author@example.com>
Your Message-ID is <foo.12345.author@example.com>
. This example will be used
below as well; make sure to replace it with the correct Message-ID for your
previous cover letter - that is, if you’re sending v2, use the Message-ID
from v1; if you’re sending v3, use the Message-ID from v2.
While you’re looking at the email, you should also note who is CC’d, as it’s common practice in the mailing list to keep all CCs on a thread. You can add these CC lines directly to your cover letter with a line like so in the header (before the Subject line):
CC: author@example.com, Othe R <other@example.com>
Now send the emails again, paying close attention to which messages you pass in to the command:
$ git send-email --to=target@example.com --in-reply-to="<foo.12345.author@example.com>" psuh/v2-*.patch
Bonus Chapter: One-Patch Changes
In some cases, your very small change may consist of only one patch. When that
happens, you only need to send one email. Your commit message should already be
meaningful and explain at a high level the purpose (what is happening and why)
of your patch, but if you need to supply even more context, you can do so below
the ---
in your patch. Take the example below, which was generated with git
format-patch
on a single commit, and then edited to add the content between
the ---
and the diffstat.
From 1345bbb3f7ac74abde040c12e737204689a72723 Mon Sep 17 00:00:00 2001 From: A U Thor <author@example.com> Date: Thu, 18 Apr 2019 15:11:02 -0700 Subject: [PATCH] README: change the grammar I think it looks better this way. This part of the commit message will end up in the commit-log. Signed-off-by: A U Thor <author@example.com> --- Let's have a wild discussion about grammar on the mailing list. This part of my email will never end up in the commit log. Here is where I can add additional context to the mailing list about my intent, outside of the context of the commit log. This section was added after `git format-patch` was run, by editing the patch file in a text editor. README.md | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/README.md b/README.md index 88f126184c..38da593a60 100644 --- a/README.md +++ b/README.md @@ -3,7 +3,7 @@ Git - fast, scalable, distributed revision control system ========================================================= -Git is a fast, scalable, distributed revision control system with an +Git is a fast, scalable, and distributed revision control system with an unusually rich command set that provides both high-level operations and full access to internals. -- 2.21.0.392.gf8f6787159e-goog
My Patch Got Emailed - Now What?
Please give reviewers enough time to process your initial patch before sending an updated version. That is, resist the temptation to send a new version immediately, because others may have already started reviewing your initial version.
While waiting for review comments, you may find mistakes in your initial patch, or perhaps realize a different and better way to achieve the goal of the patch. In this case you may communicate your findings to other reviewers as follows:
-
If the mistakes you found are minor, send a reply to your patch as if you were a reviewer and mention that you will fix them in an updated version.
-
On the other hand, if you think you want to change the course so drastically that reviews on the initial patch would be a waste of time (for everyone involved), retract the patch immediately with a reply like "I am working on a much better approach, so please ignore this patch and wait for the updated version."
Now, the above is a good practice if you sent your initial patch prematurely without polish. But a better approach of course is to avoid sending your patch prematurely in the first place.
Please be considerate of the time needed by reviewers to examine each new version of your patch. Rather than seeing the initial version right now (followed by several "oops, I like this version better than the previous one" patches over 2 days), reviewers would strongly prefer if a single polished version came 2 days later instead, and that version with fewer mistakes were the only one they would need to review.
Responding to Reviews
After a few days, you will hopefully receive a reply to your patchset with some comments. Woohoo! Now you can get back to work.
It’s good manners to reply to each comment, notifying the reviewer that you have made the change suggested, feel the original is better, or that the comment inspired you to do something a new way which is superior to both the original and the suggested change. This way reviewers don’t need to inspect your v2 to figure out whether you implemented their comment or not.
Reviewers may ask you about what you wrote in the patchset, either in the proposed commit log message or in the changes themselves. You should answer these questions in your response messages, but often the reason why reviewers asked these questions to understand what you meant to write is because your patchset needed clarification to be understood.
Do not be satisfied by just answering their questions in your response and hear them say that they now understand what you wanted to say. Update your patches to clarify the points reviewers had trouble with, and prepare your v2; the words you used to explain your v1 to answer reviewers' questions may be useful thing to use. Your goal is to make your v2 clear enough so that it becomes unnecessary for you to give the same explanation to the next person who reads it.
If you are going to push back on a comment, be polite and explain why you feel your original is better; be prepared that the reviewer may still disagree with you, and the rest of the community may weigh in on one side or the other. As with all code reviews, it’s important to keep an open mind to doing something a different way than you originally planned; other reviewers have a different perspective on the project than you do, and may be thinking of a valid side effect which had not occurred to you. It is always okay to ask for clarification if you aren’t sure why a change was suggested, or what the reviewer is asking you to do.
Make sure your email client has a plaintext email mode and it is turned on; the Git list rejects HTML email. Please also follow the mailing list etiquette outlined in the Maintainer’s Note, which are similar to etiquette rules in most open source communities surrounding bottom-posting and inline replies.
When you’re making changes to your code, it is cleanest - that is, the resulting
commits are easiest to look at - if you use git rebase -i
(interactive
rebase). Take a look at this
overview
from O’Reilly. The general idea is to modify each commit which requires changes;
this way, instead of having a patch A with a mistake, a patch B which was fine
and required no upstream reviews in v1, and a patch C which fixes patch A for
v2, you can just ship a v2 with a correct patch A and correct patch B. This is
changing history, but since it’s local history which you haven’t shared with
anyone, that is okay for now! (Later, it may not make sense to do this; take a
look at the section below this one for some context.)
After Review Approval
The Git project has four integration branches: seen
, next
, master
, and
maint
. Your change will be placed into seen
fairly early on by the maintainer
while it is still in the review process; from there, when it is ready for wider
testing, it will be merged into next
. Plenty of early testers use next
and
may report issues. Eventually, changes in next
will make it to master
,
which is typically considered stable. Finally, when a new release is cut,
maint
is used to base bugfixes onto. As mentioned at the beginning of this
document, you can read Documents/SubmittingPatches
for some more info about
the use of the various integration branches.
Back to now: your code has been lauded by the upstream reviewers. It is perfect.
It is ready to be accepted. You don’t need to do anything else; the maintainer
will merge your topic branch to next
and life is good.
However, if you discover it isn’t so perfect after this point, you may need to take some special steps depending on where you are in the process.
If the maintainer has announced in the "What’s cooking in git.git" email that
your topic is marked for next
- that is, that they plan to merge it to next
but have not yet done so - you should send an email asking the maintainer to
wait a little longer: "I’ve sent v4 of my series and you marked it for next
,
but I need to change this and that - please wait for v5 before you merge it."
If the topic has already been merged to next
, rather than modifying your
patches with git rebase -i
, you should make further changes incrementally -
that is, with another commit, based on top of the maintainer’s topic branch as
detailed in https://github.com/gitster/git. Your work is still in the same topic
but is now incremental, rather than a wholesale rewrite of the topic branch.
The topic branches in the maintainer’s GitHub are mirrored in GitGitGadget, so if you’re sending your reviews out that way, you should be sure to open your PR against the appropriate GitGitGadget/Git branch.
If you’re using git send-email
, you can use it the same way as before, but you
should generate your diffs from <topic>..<mybranch>
and base your work on
<topic>
instead of master
.