2. Osnove Git
3. Veje Git
7. Orodja Git
10. Notranjost Git-a
7.8 Orodja Git - Advanced Merging
Merging in Git is typically fairly easy. Since Git makes it easy to merge another branch multiple times, it means that you can have a very long lived branch but you can keep it up to date as you go, solving small conflicts often, rather than be surprised by one enormous conflict at the end of the series.
However, sometimes tricky conflicts do occur. Unlike some other version control systems, Git does not try to be overly clever about merge conflict resolution. Git’s philosophy is to be smart about determining when a merge resolution is unambiguous, but if there is a conflict, it does not try to be clever about automatically resolving it. Therefore, if you wait too long to merge two branches that diverge quickly, you can run into some issues.
In this section, we’ll go over what some of those issues might be and what tools Git gives you to help handle these more tricky situations. We’ll also cover some of the different, non-standard types of merges you can do, as well as see how to back out of merges that you’ve done.
While we covered some basics on resolving merge conflicts in Basic Merge Conflicts, for more complex conflicts, Git provides a few tools to help you figure out what’s going on and how to better deal with the conflict.
First of all, if at all possible, try to make sure your working directory is clean before doing a merge that may have conflicts. If you have work in progress, either commit it to a temporary branch or stash it. This makes it so that you can undo anything you try here. If you have unsaved changes in your working directory when you try a merge, some of these tips may help you lose that work.
Let’s walk through a very simple example. We have a super simple Ruby file that prints hello world.
#! /usr/bin/env ruby def hello puts 'hello world' end hello()
In our repository, we create a new branch named
whitespace and proceed to change all the Unix line endings to DOS line endings, essentially changing every line of the file, but just with whitespace.
Then we change the line “hello world” to “hello mundo”.
$ git checkout -b whitespace Switched to a new branch 'whitespace' $ unix2dos hello.rb unix2dos: converting file hello.rb to DOS format ... $ git commit -am 'converted hello.rb to DOS' [whitespace 3270f76] converted hello.rb to DOS 1 file changed, 7 insertions(+), 7 deletions(-) $ vim hello.rb $ git diff -b diff --git a/hello.rb b/hello.rb index ac51efd..e85207e 100755 --- a/hello.rb +++ b/hello.rb @@ -1,7 +1,7 @@ #! /usr/bin/env ruby def hello - puts 'hello world' + puts 'hello mundo'^M end hello() $ git commit -am 'hello mundo change' [whitespace 6d338d2] hello mundo change 1 file changed, 1 insertion(+), 1 deletion(-)
Now we switch back to our
master branch and add some documentation for the function.
$ git checkout master Switched to branch 'master' $ vim hello.rb $ git diff diff --git a/hello.rb b/hello.rb index ac51efd..36c06c8 100755 --- a/hello.rb +++ b/hello.rb @@ -1,5 +1,6 @@ #! /usr/bin/env ruby +# prints out a greeting def hello puts 'hello world' end $ git commit -am 'document the function' [master bec6336] document the function 1 file changed, 1 insertion(+)
Now we try to merge in our
whitespace branch and we’ll get conflicts because of the whitespace changes.
$ git merge whitespace Auto-merging hello.rb CONFLICT (content): Merge conflict in hello.rb Automatic merge failed; fix conflicts and then commit the result.
Aborting a Merge
We now have a few options.
First, let’s cover how to get out of this situation.
If you perhaps weren’t expecting conflicts and don’t want to quite deal with the situation yet, you can simply back out of the merge with
git merge --abort.
$ git status -sb ## master UU hello.rb $ git merge --abort $ git status -sb ## master
git merge --abort option tries to revert back to your state before you ran the merge.
The only cases where it may not be able to do this perfectly would be if you had unstashed, uncommitted changes in your working directory when you ran it, otherwise it should work fine.
If for some reason you just want to start over, you can also run
git reset --hard HEAD, and your repository will be back to the last committed state.
Remember that any uncommitted work will be lost, so make sure you don’t want any of your changes.
In this specific case, the conflicts are whitespace related. We know this because the case is simple, but it’s also pretty easy to tell in real cases when looking at the conflict because every line is removed on one side and added again on the other. By default, Git sees all of these lines as being changed, so it can’t merge the files.
The default merge strategy can take arguments though, and a few of them are about properly ignoring whitespace changes.
If you see that you have a lot of whitespace issues in a merge, you can simply abort it and do it again, this time with
The first option ignores whitespace completely when comparing lines, the second treats sequences of one or more whitespace characters as equivalent.
$ git merge -Xignore-space-change whitespace Auto-merging hello.rb Merge made by the 'recursive' strategy. hello.rb | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
Since in this case, the actual file changes were not conflicting, once we ignore the whitespace changes, everything merges just fine.
This is a lifesaver if you have someone on your team who likes to occasionally reformat everything from spaces to tabs or vice-versa.
Manual File Re-merging
Though Git handles whitespace pre-processing pretty well, there are other types of changes that perhaps Git can’t handle automatically, but are scriptable fixes. As an example, let’s pretend that Git could not handle the whitespace change and we needed to do it by hand.
What we really need to do is run the file we’re trying to merge in through a
dos2unix program before trying the actual file merge.
So how would we do that?
First, we get into the merge conflict state. Then we want to get copies of my version of the file, their version (from the branch we’re merging in) and the common version (from where both sides branched off). Then we want to fix up either their side or our side and re-try the merge again for just this single file.
Getting the three file versions is actually pretty easy.
Git stores all of these versions in the index under “stages” which each have numbers associated with them.
Stage 1 is the common ancestor, stage 2 is your version and stage 3 is from the
MERGE_HEAD, the version you’re merging in (“theirs”).
You can extract a copy of each of these versions of the conflicted file with the
git show command and a special syntax.
$ git show :1:hello.rb > hello.common.rb $ git show :2:hello.rb > hello.ours.rb $ git show :3:hello.rb > hello.theirs.rb
If you want to get a little more hard core, you can also use the
ls-files -u plumbing command to get the actual SHA-1s of the Git blobs for each of these files.
$ git ls-files -u 100755 ac51efdc3df4f4fd328d1a02ad05331d8e2c9111 1 hello.rb 100755 36c06c8752c78d2aff89571132f3bf7841a7b5c3 2 hello.rb 100755 e85207e04dfdd5eb0a1e9febbc67fd837c44a1cd 3 hello.rb
:1:hello.rb is just a shorthand for looking up that blob SHA-1.
Now that we have the content of all three stages in our working directory, we can manually fix up theirs to fix the whitespace issue and re-merge the file with the little-known
git merge-file command which does just that.
$ dos2unix hello.theirs.rb dos2unix: converting file hello.theirs.rb to Unix format ... $ git merge-file -p \ hello.ours.rb hello.common.rb hello.theirs.rb > hello.rb $ git diff -b diff --cc hello.rb index 36c06c8,e85207e..0000000 --- a/hello.rb +++ b/hello.rb @@@ -1,8 -1,7 +1,8 @@@ #! /usr/bin/env ruby +# prints out a greeting def hello - puts 'hello world' + puts 'hello mundo' end hello()
At this point we have nicely merged the file.
In fact, this actually works better than the
ignore-space-change option because this actually fixes the whitespace changes before merge instead of simply ignoring them.
ignore-space-change merge, we actually ended up with a few lines with DOS line endings, making things mixed.
If you want to get an idea before finalizing this commit about what was actually changed between one side or the other, you can ask
git diff to compare what is in your working directory that you’re about to commit as the result of the merge to any of these stages.
Let’s go through them all.
To compare your result to what you had in your branch before the merge, in other words, to see what the merge introduced, you can run
git diff --ours
$ git diff --ours * Unmerged path hello.rb diff --git a/hello.rb b/hello.rb index 36c06c8..44d0a25 100755 --- a/hello.rb +++ b/hello.rb @@ -2,7 +2,7 @@ # prints out a greeting def hello - puts 'hello world' + puts 'hello mundo' end hello()
So here we can easily see that what happened in our branch, what we’re actually introducing to this file with this merge, is changing that single line.
If we want to see how the result of the merge differed from what was on their side, you can run
git diff --theirs.
In this and the following example, we have to use
-b to strip out the whitespace because we’re comparing it to what is in Git, not our cleaned up
$ git diff --theirs -b * Unmerged path hello.rb diff --git a/hello.rb b/hello.rb index e85207e..44d0a25 100755 --- a/hello.rb +++ b/hello.rb @@ -1,5 +1,6 @@ #! /usr/bin/env ruby +# prints out a greeting def hello puts 'hello mundo' end
Finally, you can see how the file has changed from both sides with
git diff --base.
$ git diff --base -b * Unmerged path hello.rb diff --git a/hello.rb b/hello.rb index ac51efd..44d0a25 100755 --- a/hello.rb +++ b/hello.rb @@ -1,7 +1,8 @@ #! /usr/bin/env ruby +# prints out a greeting def hello - puts 'hello world' + puts 'hello mundo' end hello()
At this point we can use the
git clean command to clear out the extra files we created to do the manual merge but no longer need.
$ git clean -f Removing hello.common.rb Removing hello.ours.rb Removing hello.theirs.rb
Checking Out Conflicts
Perhaps we’re not happy with the resolution at this point for some reason, or maybe manually editing one or both sides still didn’t work well and we need more context.
Let’s change up the example a little. For this example, we have two longer lived branches that each have a few commits in them but create a legitimate content conflict when merged.
$ git log --graph --oneline --decorate --all * f1270f7 (HEAD, master) update README * 9af9d3b add a README * 694971d update phrase to hola world | * e3eb223 (mundo) add more tests | * 7cff591 add testing script | * c3ffff1 changed text to hello mundo |/ * b7dcc89 initial hello world code
We now have three unique commits that live only on the
master branch and three others that live on the
If we try to merge the
mundo branch in, we get a conflict.
$ git merge mundo Auto-merging hello.rb CONFLICT (content): Merge conflict in hello.rb Automatic merge failed; fix conflicts and then commit the result.
We would like to see what the merge conflict is. If we open up the file, we’ll see something like this:
#! /usr/bin/env ruby def hello <<<<<<< HEAD puts 'hola world' ======= puts 'hello mundo' >>>>>>> mundo end hello()
Both sides of the merge added content to this file, but some of the commits modified the file in the same place that caused this conflict.
Let’s explore a couple of tools that you now have at your disposal to determine how this conflict came to be. Perhaps it’s not obvious how exactly you should fix this conflict. You need more context.
One helpful tool is
git checkout with the ‘--conflict’ option.
This will re-checkout the file again and replace the merge conflict markers.
This can be useful if you want to reset the markers and try to resolve them again.
You can pass
merge (which is the default).
If you pass it
diff3, Git will use a slightly different version of conflict markers, not only giving you the “ours” and “theirs” versions, but also the “base” version inline to give you more context.
$ git checkout --conflict=diff3 hello.rb
Once we run that, the file will look like this instead:
#! /usr/bin/env ruby def hello <<<<<<< ours puts 'hola world' ||||||| base puts 'hello world' ======= puts 'hello mundo' >>>>>>> theirs end hello()
If you like this format, you can set it as the default for future merge conflicts by setting the
merge.conflictstyle setting to
$ git config --global merge.conflictstyle diff3
git checkout command can also take
--theirs options, which can be a really fast way of just choosing either one side or the other without merging things at all.
This can be particularly useful for conflicts of binary files where you can simply choose one side, or where you only want to merge certain files in from another branch - you can do the merge and then checkout certain files from one side or the other before committing.
Another useful tool when resolving merge conflicts is
This can help you get context on what may have contributed to the conflicts.
Reviewing a little bit of history to remember why two lines of development were touching the same area of code can be really helpful sometimes.
To get a full list of all of the unique commits that were included in either branch involved in this merge, we can use the “triple dot” syntax that we learned in Triple Dot.
$ git log --oneline --left-right HEAD...MERGE_HEAD < f1270f7 update README < 9af9d3b add a README < 694971d update phrase to hola world > e3eb223 add more tests > 7cff591 add testing script > c3ffff1 changed text to hello mundo
That’s a nice list of the six total commits involved, as well as which line of development each commit was on.
We can further simplify this though to give us much more specific context.
If we add the
--merge option to
git log, it will only show the commits in either side of the merge that touch a file that’s currently conflicted.
$ git log --oneline --left-right --merge < 694971d update phrase to hola world > c3ffff1 changed text to hello mundo
If you run that with the
-p option instead, you get just the diffs to the file that ended up in conflict.
This can be really helpful in quickly giving you the context you need to help understand why something conflicts and how to more intelligently resolve it.
Combined Diff Format
Since Git stages any merge results that are successful, when you run
git diff while in a conflicted merge state, you only get what is currently still in conflict.
This can be helpful to see what you still have to resolve.
When you run
git diff directly after a merge conflict, it will give you information in a rather unique diff output format.
$ git diff diff --cc hello.rb index 0399cd5,59727f0..0000000 --- a/hello.rb +++ b/hello.rb @@@ -1,7 -1,7 +1,11 @@@ #! /usr/bin/env ruby def hello ++<<<<<<< HEAD + puts 'hola world' ++======= + puts 'hello mundo' ++>>>>>>> mundo end hello()
The format is called “Combined Diff” and gives you two columns of data next to each line. The first column shows you if that line is different (added or removed) between the “ours” branch and the file in your working directory and the second column does the same between the “theirs” branch and your working directory copy.
So in that example you can see that the
>>>>>>> lines are in the working copy but were not in either side of the merge.
This makes sense because the merge tool stuck them in there for our context, but we’re expected to remove them.
If we resolve the conflict and run
git diff again, we’ll see the same thing, but it’s a little more useful.
$ vim hello.rb $ git diff diff --cc hello.rb index 0399cd5,59727f0..0000000 --- a/hello.rb +++ b/hello.rb @@@ -1,7 -1,7 +1,7 @@@ #! /usr/bin/env ruby def hello - puts 'hola world' - puts 'hello mundo' ++ puts 'hola mundo' end hello()
This shows us that “hola world” was in our side but not in the working copy, that “hello mundo” was in their side but not in the working copy and finally that “hola mundo” was not in either side but is now in the working copy. This can be useful to review before committing the resolution.
You can also get this from the
git log for any merge to see how something was resolved after the fact.
Git will output this format if you run
git show on a merge commit, or if you add a
--cc option to a
git log -p (which by default only shows patches for non-merge commits).
$ git log --cc -p -1 commit 14f41939956d80b9e17bb8721354c33f8d5b5a79 Merge: f1270f7 e3eb223 Author: Scott Chacon <email@example.com> Date: Fri Sep 19 18:14:49 2014 +0200 Merge branch 'mundo' Conflicts: hello.rb diff --cc hello.rb index 0399cd5,59727f0..e1d0799 --- a/hello.rb +++ b/hello.rb @@@ -1,7 -1,7 +1,7 @@@ #! /usr/bin/env ruby def hello - puts 'hola world' - puts 'hello mundo' ++ puts 'hola mundo' end hello()
Now that you know how to create a merge commit, you’ll probably make some by mistake. One of the great things about working with Git is that it’s okay to make mistakes, because it’s possible (and in many cases easy) to fix them.
Merge commits are no different.
Let’s say you started work on a topic branch, accidentally merged it into
master, and now your commit history looks like this:
There are two ways to approach this problem, depending on what your desired outcome is.
Fix the references
If the unwanted merge commit only exists on your local repository, the easiest and best solution is to move the branches so that they point where you want them to.
In most cases, if you follow the errant
git merge with
git reset --hard HEAD~, this will reset the branch pointers so they look like this:
git reset --hard HEAD~
reset back in Reset Demystified, so it shouldn’t be too hard to figure out what’s going on here.
Here’s a quick refresher:
reset --hard usually goes through three steps:
Move the branch HEAD points to. In this case, we want to move
masterto where it was before the merge commit (
Make the index look like HEAD.
Make the working directory look like the index.
The downside of this approach is that it’s rewriting history, which can be problematic with a shared repository.
Check out Nevarnosti ponovnega baziranja for more on what can happen; the short version is that if other people have the commits you’re rewriting, you should probably avoid
This approach also won’t work if any other commits have been created since the merge; moving the refs would effectively lose those changes.
Reverse the commit
If moving the branch pointers around isn’t going to work for you, Git gives you the option of making a new commit which undoes all the changes from an existing one. Git calls this operation a “revert”, and in this particular scenario, you’d invoke it like this:
$ git revert -m 1 HEAD [master b1d8379] Revert "Merge branch 'topic'"
-m 1 flag indicates which parent is the “mainline” and should be kept.
When you invoke a merge into
git merge topic), the new commit has two parents: the first one is
C6), and the second is the tip of the branch being merged in (
In this case, we want to undo all the changes introduced by merging in parent #2 (
C4), while keeping all the content from parent #1 (
The history with the revert commit looks like this:
git revert -m 1
The new commit
^M has exactly the same contents as
C6, so starting from here it’s as if the merge never happened, except that the now-unmerged commits are still in
Git will get confused if you try to merge
$ git merge topic Already up-to-date.
There’s nothing in
topic that isn’t already reachable from
What’s worse, if you add work to
topic and merge again, Git will only bring in the changes since the reverted merge:
The best way around this is to un-revert the original merge, since now you want to bring in the changes that were reverted out, then create a new merge commit:
$ git revert ^M [master 09f0126] Revert "Revert "Merge branch 'topic'"" $ git merge topic
In this example,
^M cancel out.
^^M effectively merges in the changes from
C8 merges in the changes from
C7, so now
topic is fully merged.
Other Types of Merges
So far we’ve covered the normal merge of two branches, normally handled with what is called the “recursive” strategy of merging. There are other ways to merge branches together however. Let’s cover a few of them quickly.
Our or Theirs Preference
First of all, there is another useful thing we can do with the normal “recursive” mode of merging.
We’ve already seen the
ignore-space-change options which are passed with a
-X but we can also tell Git to favor one side or the other when it sees a conflict.
By default, when Git sees a conflict between two branches being merged, it will add merge conflict markers into your code and mark the file as conflicted and let you resolve it.
If you would prefer for Git to simply choose a specific side and ignore the other side instead of letting you manually resolve the conflict, you can pass the
merge command either a
If Git sees this, it will not add conflict markers. Any differences that are mergeable, it will merge. Any differences that conflict, it will simply choose the side you specify in whole, including binary files.
If we go back to the “hello world” example we were using before, we can see that merging in our branch causes conflicts.
$ git merge mundo Auto-merging hello.rb CONFLICT (content): Merge conflict in hello.rb Resolved 'hello.rb' using previous resolution. Automatic merge failed; fix conflicts and then commit the result.
However if we run it with
-Xtheirs it does not.
$ git merge -Xours mundo Auto-merging hello.rb Merge made by the 'recursive' strategy. hello.rb | 2 +- test.sh | 2 ++ 2 files changed, 3 insertions(+), 1 deletion(-) create mode 100644 test.sh
In that case, instead of getting conflict markers in the file with “hello mundo” on one side and “hola world” on the other, it will simply pick “hola world”. However, all the other non-conflicting changes on that branch are merged successfully in.
This option can also be passed to the
git merge-file command we saw earlier by running something like
git merge-file --ours for individual file merges.
If you want to do something like this but not have Git even try to merge changes from the other side in, there is a more draconian option, which is the “ours” merge strategy. This is different from the “ours” recursive merge option.
This will basically do a fake merge. It will record a new merge commit with both branches as parents, but it will not even look at the branch you’re merging in. It will simply record as the result of the merge the exact code in your current branch.
$ git merge -s ours mundo Merge made by the 'ours' strategy. $ git diff HEAD HEAD~ $
You can see that there is no difference between the branch we were on and the result of the merge.
This can often be useful to basically trick Git into thinking that a branch is already merged when doing a merge later on.
For example, say you branched off a
release branch and have done some work on it that you will want to merge back into your
master branch at some point.
In the meantime some bugfix on
master needs to be backported into your
You can merge the bugfix branch into the
release branch and also
merge -s ours the same branch into your
master branch (even though the fix is already there) so when you later merge the
release branch again, there are no conflicts from the bugfix.
Združevanje pod dreves
Ideja združevanja pod dreves (subtree merge) je, da imate dva projekta in eden izmed projektov je preslikan v poddirektorij drugega in obratno. Ko določite združitev pod dreves, je Git pogostokrat dovolj pameten, da ugotovi, da je en pod drevo drugega in ju ustrezno združi.
Šli bomo skozi primer dodajanja ločenega projekta v obstoječi projekt in nato združili kodo drugega v poddirektorij prvega.
Najprej bomo dodali aplikacijo Rack v naš projekt. Dodali bomo projekt Rack kot oddaljeno referenco v vaš lasten projekt in ga nato izpisali v svojo lastno vejo:
$ git remote add rack_remote https://github.com/rack/rack $ git fetch rack_remote warning: no common commits remote: Counting objects: 3184, done. remote: Compressing objects: 100% (1465/1465), done. remote: Total 3184 (delta 1952), reused 2770 (delta 1675) Receiving objects: 100% (3184/3184), 677.42 KiB | 4 KiB/s, done. Resolving deltas: 100% (1952/1952), done. From https://github.com/rack/rack * [new branch] build -> rack_remote/build * [new branch] master -> rack_remote/master * [new branch] rack-0.4 -> rack_remote/rack-0.4 * [new branch] rack-0.9 -> rack_remote/rack-0.9 $ git checkout -b rack_branch rack_remote/master Branch rack_branch set up to track remote branch refs/remotes/rack_remote/master. Switched to a new branch "rack_branch"
Sedaj imate vrh projekta Rack v vaši veji
rack_branch``in vaš lastni projekt v veji `master.
Če izpišete enega in nato drugega lahko vidite, da imata različne vrhe projektov:
$ ls AUTHORS KNOWN-ISSUES Rakefile contrib lib COPYING README bin example test $ git checkout master Switched to branch "master" $ ls README
To je nekako čuden koncept. Ne vse veje v vašem repozitoriju dejansko morajo biti veje istega projekta. Ni pogosto, ker je redko v pomoč, vendar je precej enostavno imeti veje, ki vsebujejo popolnoma različne zgodovine.
V tem primeru želimo potegniti projekt Rack v naš projekt
master kot poddirektorij.
To lahko naredimo v Git-u z
read-tree in njegovih prijateljih se bomo naučili v [ch10-git-internals], vendar za sedaj vedite, da prebere vrh drevesa ene veje v vašo trenutno vmesno fazo in delujoči direktorij.
Smo samo preklopili nazaj na našo vejo
master in potegnimo vejo
rack_branch v poddirektorij
rack naše veje
master našega glavnega projekta:
$ git read-tree --prefix=rack/ -u rack_branch
Ko pošljemo izgleda kot da imamo vse datoteke Rack pod tem poddirektorijem - kakor če smo jih kopirali iz tarball-a. Kar postane zanimivo je, da lahko precej enostavno združimo spremembe iz ene veje v drugo. Torej če projekt Rack posodobi, lahko potegnemo spremembe navzgor s preklopom na to vejo in potegom:
$ git checkout rack_branch $ git pull
Nato lahko združimo te spremembe nazaj v našo vejo
Da potegnemo spremembe in vnaprej napolnimo sporočilo pošiljanja, uporabimo opcijo
--squash kot tudi rekurzivno strateško združevalno opcijo
-Xsubtree. (Rekurzivna strategija je tu privzeta, vendar jo vključujemo zaradi jasnosti.)
$ git checkout master $ git merge --squash -s recursive -Xsubtree=rack rack_branch Squash commit -- not updating HEAD Automatic merge went well; stopped before committing as requested
Vse spremembe iz projekta Rack so združene in pripravljene za pošiljanje lokalno.
Lahko tudi naredite nasprotno - naredite spremembe v poddirektoriju
rack vaše veje master in jih nato kasneje združite v vašo vejo
rack_branch, da jih pošljete vzdrževalcem ali potisnete navzgor.
To nam da način imeti potek dela nekako podoben poteku dela s submoduli brez uporabe submodulov (kar bomo pokrili v Submodules). Lahko obdržimo veje z ostalih povezanih projektov v našem repozitoriju in jih občasno pod drevesno združimo v naš projekt. Na neke načine je lepo, na primer vsa koda je poslana na eno mesto. Vendar ima ostale slabosti v tem, da je malo bolj kompleksna in enostavna za narediti napake in ponovno integrirati spremembe ali po nesreči potisniti vejo v nepovezani repozitorij.
Druga nekoliko čudna stvar je, da dobiti razliko med tem, kar imate v vašem poddirektoriju
rack in kodo v vaši veji
rack_branch - da vidite, če jih potrebujete združiti - ne morete normalno uporabiti ukaza
Namesto tega morate pognati
git diff-tree z vejo, ki jo želite primerjati:
$ git diff-tree -p rack_branch
Ali primerjati, kaj je v vašem poddirektoriju
rack s tem, kaje je bila veja
master na strežniku zadnjič, ko ste ujeli, lahko poženete
$ git diff-tree -p rack_remote/master