10. Internos do Git
4.1 Git no Servidor - The Protocols
Neste ponto, deves fazer a maioria das tarefas do dia-a-dia para as quais tu estarás a usar o Git. No entanto, para fazeres qualquer colaboração no Git, precisarás de ter um repositório Git remoto. Embora possas pressionar as mudanças tecnicamente e puxar as mudanças dos repositórios dos indivíduos, fazê-lo é desencorajado porque tu podes facilmente confundir no que estás a trabalhar se não tiveres cuidado. Além disto se desejas que os teus colaboradores possam aceder o repositório, mesmo que o teu computador esteja desconectado — geralmente é útil um repositório comum mais confiável. Portanto, o método preferido para colaborar com alguém é configurar um repositório intermediário ao qual ambos tenham acesso e que possam empurrar para e puxar de apartir dele.
A execução de um servidor Git é bastante direta. Primeiro, escolhes quais os protocolos que tu desejas que o teu servidor comunique. A primeira seção deste capítulo abordará os protocolos disponíveis e os prós e contras de cada um. As próximas seções irão explicar algumas configurações típicas usando estes protocolos e como fazer o servidor funcionar com eles. Por último, examinaremos algumas opções hospedadas, se tu não te importares de hospedar o teu código no servidor de outra pessoa e não quiseres passar pelo incômodo de configurar e manter o teu próprio servidor.
Se não tens interesse em executar o teu próprio servidor, podes saltar para a última seção do capítulo para ver algumas opções para configurar uma conta hospedada e em seguida, passar para o próximo capítulo, onde discutimos os vários prós e contras do trabalho num ambiente de controle de fonte distribuída
Um repositório remoto geralmente é um repositório simples — um repositório Git que não possui um diretório de trabalho. Como o repositório é usado apenas como um ponto de colaboração, não há nenhuma razão para ter um registro instantâneo registrado no disco; são apenas os dados do Git.
Nos termos mais simples, um repositório descoberto é o conteúdo do diretório
.git do teu projeto e nada mais.
Git can use four distinct protocols to transfer data: Local, HTTP, Secure Shell (SSH) and Git. Here we’ll discuss what they are and in what basic circumstances you would want (or not want) to use them.
The most basic is the Local protocol, in which the remote repository is in another directory on the same host. This is often used if everyone on your team has access to a shared filesystem such as an NFS mount, or in the less likely case that everyone logs in to the same computer. The latter wouldn’t be ideal, because all your code repository instances would reside on the same computer, making a catastrophic loss much more likely.
If you have a shared mounted filesystem, then you can clone, push to, and pull from a local file-based repository. To clone a repository like this, or to add one as a remote to an existing project, use the path to the repository as the URL. For example, to clone a local repository, you can run something like this:
$ git clone /srv/git/project.git
Or you can do this:
$ git clone file:///srv/git/project.git
Git operates slightly differently if you explicitly specify
file:// at the beginning of the URL.
If you just specify the path, Git tries to use hardlinks or directly copy the files it needs.
If you specify
file://, Git fires up the processes that it normally uses to transfer data over a network, which is generally much less efficient.
The main reason to specify the
file:// prefix is if you want a clean copy of the repository with extraneous references or objects left out — generally after an import from another VCS or something similar (see Internos do Git for maintenance tasks).
We’ll use the normal path here because doing so is almost always faster.
To add a local repository to an existing Git project, you can run something like this:
$ git remote add local_proj /srv/git/project.git
Then, you can push to and pull from that remote via your new remote name
local_proj as though you were doing so over a network.
The pros of file-based repositories are that they’re simple and they use existing file permissions and network access. If you already have a shared filesystem to which your whole team has access, setting up a repository is very easy. You stick the bare repository copy somewhere everyone has shared access to and set the read/write permissions as you would for any other shared directory. We’ll discuss how to export a bare repository copy for this purpose in Getting Git on a Server.
This is also a nice option for quickly grabbing work from someone else’s working repository.
If you and a co-worker are working on the same project and they want you to check something out, running a command like
git pull /home/john/project is often easier than them pushing to a remote server and you subsequently fetching from it.
The cons of this method are that shared access is generally more difficult to set up and reach from multiple locations than basic network access. If you want to push from your laptop when you’re at home, you have to mount the remote disk, which can be difficult and slow compared to network-based access.
It’s important to mention that this isn’t necessarily the fastest option if you’re using a shared mount of some kind. A local repository is fast only if you have fast access to the data. A repository on NFS is often slower than the repository over SSH on the same server, allowing Git to run off local disks on each system.
Finally, this protocol does not protect the repository against accidental damage. Every user has full shell access to the “remote” directory, and there is nothing preventing them from changing or removing internal Git files and corrupting the repository.
The HTTP Protocols
Git can communicate over HTTP using two different modes. Prior to Git 1.6.6, there was only one way it could do this which was very simple and generally read-only. In version 1.6.6, a new, smarter protocol was introduced that involved Git being able to intelligently negotiate data transfer in a manner similar to how it does over SSH. In the last few years, this new HTTP protocol has become very popular since it’s simpler for the user and smarter about how it communicates. The newer version is often referred to as the Smart HTTP protocol and the older way as Dumb HTTP. We’ll cover the newer Smart HTTP protocol first.
Smart HTTP operates very similarly to the SSH or Git protocols but runs over standard HTTPS ports and can use various HTTP authentication mechanisms, meaning it’s often easier on the user than something like SSH, since you can use things like username/password authentication rather than having to set up SSH keys.
It has probably become the most popular way to use Git now, since it can be set up to both serve anonymously like the
git:// protocol, and can also be pushed over with authentication and encryption like the SSH protocol.
Instead of having to set up different URLs for these things, you can now use a single URL for both.
If you try to push and the repository requires authentication (which it normally should), the server can prompt for a username and password.
The same goes for read access.
In fact, for services like GitHub, the URL you use to view the repository online (for example, https://github.com/schacon/simplegit) is the same URL you can use to clone and, if you have access, push over.
If the server does not respond with a Git HTTP smart service, the Git client will try to fall back to the simpler Dumb HTTP protocol.
The Dumb protocol expects the bare Git repository to be served like normal files from the web server.
The beauty of Dumb HTTP is the simplicity of setting it up.
Basically, all you have to do is put a bare Git repository under your HTTP document root and set up a specific
post-update hook, and you’re done (See Git Hooks).
At that point, anyone who can access the web server under which you put the repository can also clone your repository.
To allow read access to your repository over HTTP, do something like this:
$ cd /var/www/htdocs/ $ git clone --bare /path/to/git_project gitproject.git $ cd gitproject.git $ mv hooks/post-update.sample hooks/post-update $ chmod a+x hooks/post-update
post-update hook that comes with Git by default runs the appropriate command (
git update-server-info) to make HTTP fetching and cloning work properly.
This command is run when you push to this repository (over SSH perhaps); then, other people can clone via something like
$ git clone https://example.com/gitproject.git
In this particular case, we’re using the
/var/www/htdocs path that is common for Apache setups, but you can use any static web server — just put the bare repository in its path.
The Git data is served as basic static files (see the Internos do Git chapter for details about exactly how it’s served).
Generally you would either choose to run a read/write Smart HTTP server or simply have the files accessible as read-only in the Dumb manner. It’s rare to run a mix of the two services.
We’ll concentrate on the pros of the Smart version of the HTTP protocol.
The simplicity of having a single URL for all types of access and having the server prompt only when authentication is needed makes things very easy for the end user. Being able to authenticate with a username and password is also a big advantage over SSH, since users don’t have to generate SSH keys locally and upload their public key to the server before being able to interact with it. For less sophisticated users, or users on systems where SSH is less common, this is a major advantage in usability. It is also a very fast and efficient protocol, similar to the SSH one.
You can also serve your repositories read-only over HTTPS, which means you can encrypt the content transfer; or you can go so far as to make the clients use specific signed SSL certificates.
Another nice thing is that HTTPS are such commonly used protocols that corporate firewalls are often set up to allow traffic through these ports.
Git over HTTPS can be a little more tricky to set up compared to SSH on some servers. Other than that, there is very little advantage that other protocols have over Smart HTTP for serving Git content.
If you’re using HTTP for authenticated pushing, providing your credentials is sometimes more complicated than using keys over SSH. There are, however, several credential caching tools you can use, including Keychain access on macOS and Credential Manager on Windows, to make this pretty painless. Read Credential Storage to see how to set up secure HTTP password caching on your system.
The SSH Protocol
A common transport protocol for Git when self-hosting is over SSH. This is because SSH access to servers is already set up in most places — and if it isn’t, it’s easy to do. SSH is also an authenticated network protocol and, because it’s ubiquitous, it’s generally easy to set up and use.
To clone a Git repository over SSH, you can specify an
ssh:// URL like this:
$ git clone ssh://[user@]server/project.git
Or you can use the shorter scp-like syntax for the SSH protocol:
$ git clone [user@]server:project.git
In both cases above, if you don’t specify the optional username, Git assumes the user you’re currently logged in as.
The pros of using SSH are many. First, SSH is relatively easy to set up — SSH daemons are commonplace, many network admins have experience with them, and many OS distributions are set up with them or have tools to manage them. Next, access over SSH is secure — all data transfer is encrypted and authenticated. Last, like the HTTPS, Git and Local protocols, SSH is efficient, making the data as compact as possible before transferring it.
The negative aspect of SSH is that it doesn’t support anonymous access to your Git repository. If you’re using SSH, people must have SSH access to your machine, even in a read-only capacity, which doesn’t make SSH conducive to open source projects for which people might simply want to clone your repository to examine it. If you’re using it only within your corporate network, SSH may be the only protocol you need to deal with. If you want to allow anonymous read-only access to your projects and also want to use SSH, you’ll have to set up SSH for you to push over but something else for others to fetch from.
The Git Protocol
Next is the Git protocol.
This is a special daemon that comes packaged with Git; it listens on a dedicated port (9418) that provides a service similar to the SSH protocol, but with absolutely no authentication.
In order for a repository to be served over the Git protocol, you must create a
git-daemon-export-ok file — the daemon won’t serve a repository without that file in it — but other than that there is no security.
Either the Git repository is available for everyone to clone, or it isn’t.
This means that there is generally no pushing over this protocol.
You can enable push access but, given the lack of authentication, anyone on the internet who finds your project’s URL could push to that project.
Suffice it to say that this is rare.
The Git protocol is often the fastest network transfer protocol available. If you’re serving a lot of traffic for a public project or serving a very large project that doesn’t require user authentication for read access, it’s likely that you’ll want to set up a Git daemon to serve your project. It uses the same data-transfer mechanism as the SSH protocol but without the encryption and authentication overhead.
The downside of the Git protocol is the lack of authentication.
It’s generally undesirable for the Git protocol to be the only access to your project.
Generally, you’ll pair it with SSH or HTTPS access for the few developers who have push (write) access and have everyone else use
git:// for read-only access.
It’s also probably the most difficult protocol to set up.
It must run its own daemon, which requires
xinetd configuration or the like, which isn’t always a walk in the park.
It also requires firewall access to port 9418, which isn’t a standard port that corporate firewalls always allow.
Behind big corporate firewalls, this obscure port is commonly blocked.