Setup and Config
Getting and Creating Projects
Basic Snapshotting
Branching and Merging
Sharing and Updating Projects
Inspection and Comparison
Patching
Debugging
External Systems
Server Admin
Guides
- gitattributes
- Command-line interface conventions
- Everyday Git
- Frequently Asked Questions (FAQ)
- Glossary
- Hooks
- gitignore
- gitmodules
- Revisions
- Submodules
- Tutorial
- Workflows
- All guides...
Administration
Plumbing Commands
- 2.43.2 → 2.44.0 no changes
-
2.43.1
02/09/24
-
2.43.0
11/20/23
- 2.42.1 no changes
-
2.42.0
08/21/23
- 2.40.0 → 2.41.0 no changes
-
2.39.3
04/17/23
- 2.38.1 → 2.39.2 no changes
-
2.38.0
10/02/22
- 2.35.1 → 2.37.7 no changes
-
2.35.0
01/24/22
- 2.34.1 → 2.34.8 no changes
-
2.34.0
11/15/21
- 2.33.2 → 2.33.8 no changes
-
2.33.1
10/12/21
-
2.33.0
08/16/21
- 2.30.1 → 2.32.7 no changes
-
2.30.0
12/27/20
- 2.29.1 → 2.29.3 no changes
-
2.29.0
10/19/20
- 2.27.1 → 2.28.1 no changes
-
2.27.0
06/01/20
SYNOPSIS
git merge [-n] [--stat] [--no-commit] [--squash] [--[no-]edit] [--no-verify] [-s <strategy>] [-X <strategy-option>] [-S[<keyid>]] [--[no-]allow-unrelated-histories] [--[no-]rerere-autoupdate] [-m <msg>] [-F <file>] [--into-name <branch>] [<commit>…] git merge (--continue | --abort | --quit)
DESCRIPTION
Incorporates changes from the named commits (since the time their
histories diverged from the current branch) into the current
branch. This command is used by git pull
to incorporate changes
from another repository and can be used by hand to merge changes
from one branch into another.
Assume the following history exists and the current branch is
master
:
A---B---C topic / D---E---F---G master
Then git merge topic
will replay the changes made on the
topic
branch since it diverged from master
(i.e., E
) until
its current commit (C
) on top of master
, and record the result
in a new commit along with the names of the two parent commits and
a log message from the user describing the changes. Before the operation,
ORIG_HEAD
is set to the tip of the current branch (C
).
A---B---C topic / \ D---E---F---G---H master
A merge stops if there’s a conflict that cannot be resolved
automatically or if --no-commit
was provided when initiating the
merge. At that point you can run git merge --abort
or git merge
--continue
.
git merge --abort
will abort the merge process and try to reconstruct
the pre-merge state. However, if there were uncommitted changes when the
merge started (and especially if those changes were further modified
after the merge was started), git merge --abort
will in some cases be
unable to reconstruct the original (pre-merge) changes. Therefore:
Warning: Running git merge
with non-trivial uncommitted changes is
discouraged: while possible, it may leave you in a state that is hard to
back out of in the case of a conflict.
OPTIONS
- --commit
- --no-commit
-
Perform the merge and commit the result. This option can be used to override --no-commit.
With --no-commit perform the merge and stop just before creating a merge commit, to give the user a chance to inspect and further tweak the merge result before committing.
Note that fast-forward updates do not create a merge commit and therefore there is no way to stop those merges with --no-commit. Thus, if you want to ensure your branch is not changed or updated by the merge command, use --no-ff with --no-commit.
- --edit
- -e
- --no-edit
-
Invoke an editor before committing successful mechanical merge to further edit the auto-generated merge message, so that the user can explain and justify the merge. The
--no-edit
option can be used to accept the auto-generated message (this is generally discouraged). The--edit
(or-e
) option is still useful if you are giving a draft message with the-m
option from the command line and want to edit it in the editor.Older scripts may depend on the historical behaviour of not allowing the user to edit the merge log message. They will see an editor opened when they run
git merge
. To make it easier to adjust such scripts to the updated behaviour, the environment variableGIT_MERGE_AUTOEDIT
can be set tono
at the beginning of them. - --cleanup=<mode>
-
This option determines how the merge message will be cleaned up before committing. See git-commit[1] for more details. In addition, if the <mode> is given a value of
scissors
, scissors will be appended toMERGE_MSG
before being passed on to the commit machinery in the case of a merge conflict. - --ff
- --no-ff
- --ff-only
-
Specifies how a merge is handled when the merged-in history is already a descendant of the current history.
--ff
is the default unless merging an annotated (and possibly signed) tag that is not stored in its natural place in therefs/tags/
hierarchy, in which case--no-ff
is assumed.With
--ff
, when possible resolve the merge as a fast-forward (only update the branch pointer to match the merged branch; do not create a merge commit). When not possible (when the merged-in history is not a descendant of the current history), create a merge commit.With
--no-ff
, create a merge commit in all cases, even when the merge could instead be resolved as a fast-forward.With
--ff-only
, resolve the merge as a fast-forward when possible. When not possible, refuse to merge and exit with a non-zero status. - -S[<keyid>]
- --gpg-sign[=<keyid>]
- --no-gpg-sign
-
GPG-sign the resulting merge commit. The
keyid
argument is optional and defaults to the committer identity; if specified, it must be stuck to the option without a space.--no-gpg-sign
is useful to countermand bothcommit.gpgSign
configuration variable, and earlier--gpg-sign
. - --log[=<n>]
- --no-log
-
In addition to branch names, populate the log message with one-line descriptions from at most <n> actual commits that are being merged. See also git-fmt-merge-msg[1].
With --no-log do not list one-line descriptions from the actual commits being merged.
- --signoff
- --no-signoff
-
Add a
Signed-off-by
trailer by the committer at the end of the commit log message. The meaning of a signoff depends on the project to which you’re committing. For example, it may certify that the committer has the rights to submit the work under the project’s license or agrees to some contributor representation, such as a Developer Certificate of Origin. (See https://developercertificate.org for the one used by the Linux kernel and Git projects.) Consult the documentation or leadership of the project to which you’re contributing to understand how the signoffs are used in that project.The --no-signoff option can be used to countermand an earlier --signoff option on the command line.
- --stat
- -n
- --no-stat
-
Show a diffstat at the end of the merge. The diffstat is also controlled by the configuration option merge.stat.
With -n or --no-stat do not show a diffstat at the end of the merge.
- --squash
- --no-squash
-
Produce the working tree and index state as if a real merge happened (except for the merge information), but do not actually make a commit, move the
HEAD
, or record$GIT_DIR/MERGE_HEAD
(to cause the nextgit commit
command to create a merge commit). This allows you to create a single commit on top of the current branch whose effect is the same as merging another branch (or more in case of an octopus).With --no-squash perform the merge and commit the result. This option can be used to override --squash.
With --squash, --commit is not allowed, and will fail.
- --[no-]verify
-
By default, the pre-merge and commit-msg hooks are run. When
--no-verify
is given, these are bypassed. See also githooks[5]. - -s <strategy>
- --strategy=<strategy>
-
Use the given merge strategy; can be supplied more than once to specify them in the order they should be tried. If there is no
-s
option, a built-in list of strategies is used instead (ort
when merging a single head,octopus
otherwise). - -X <option>
- --strategy-option=<option>
-
Pass merge strategy specific option through to the merge strategy.
- --verify-signatures
- --no-verify-signatures
-
Verify that the tip commit of the side branch being merged is signed with a valid key, i.e. a key that has a valid uid: in the default trust model, this means the signing key has been signed by a trusted key. If the tip commit of the side branch is not signed with a valid key, the merge is aborted.
- --summary
- --no-summary
-
Synonyms to --stat and --no-stat; these are deprecated and will be removed in the future.
- -q
- --quiet
-
Operate quietly. Implies --no-progress.
- -v
- --verbose
-
Be verbose.
- --progress
- --no-progress
-
Turn progress on/off explicitly. If neither is specified, progress is shown if standard error is connected to a terminal. Note that not all merge strategies may support progress reporting.
- --autostash
- --no-autostash
-
Automatically create a temporary stash entry before the operation begins, record it in the ref
MERGE_AUTOSTASH
and apply it after the operation ends. This means that you can run the operation on a dirty worktree. However, use with care: the final stash application after a successful merge might result in non-trivial conflicts. -
By default,
git merge
command refuses to merge histories that do not share a common ancestor. This option can be used to override this safety when merging histories of two projects that started their lives independently. As that is a very rare occasion, no configuration variable to enable this by default exists and will not be added. - -m <msg>
-
Set the commit message to be used for the merge commit (in case one is created).
If
--log
is specified, a shortlog of the commits being merged will be appended to the specified message.The
git fmt-merge-msg
command can be used to give a good default for automatedgit merge
invocations. The automated message can include the branch description. - --into-name <branch>
-
Prepare the default merge message as if merging to the branch
<branch>
, instead of the name of the real branch to which the merge is made. - -F <file>
- --file=<file>
-
Read the commit message to be used for the merge commit (in case one is created).
If
--log
is specified, a shortlog of the commits being merged will be appended to the specified message. - --rerere-autoupdate
- --no-rerere-autoupdate
-
After the rerere mechanism reuses a recorded resolution on the current conflict to update the files in the working tree, allow it to also update the index with the result of resolution.
--no-rerere-autoupdate
is a good way to double-check whatrerere
did and catch potential mismerges, before committing the result to the index with a separategit add
. - --overwrite-ignore
- --no-overwrite-ignore
-
Silently overwrite ignored files from the merge result. This is the default behavior. Use
--no-overwrite-ignore
to abort. - --abort
-
Abort the current conflict resolution process, and try to reconstruct the pre-merge state. If an autostash entry is present, apply it to the worktree.
If there were uncommitted worktree changes present when the merge started,
git merge --abort
will in some cases be unable to reconstruct these changes. It is therefore recommended to always commit or stash your changes before runninggit merge
.git merge --abort
is equivalent togit reset --merge
whenMERGE_HEAD
is present unlessMERGE_AUTOSTASH
is also present in which casegit merge --abort
applies the stash entry to the worktree whereasgit reset --merge
will save the stashed changes in the stash list. - --quit
-
Forget about the current merge in progress. Leave the index and the working tree as-is. If
MERGE_AUTOSTASH
is present, the stash entry will be saved to the stash list. - --continue
-
After a
git merge
stops due to conflicts you can conclude the merge by runninggit merge --continue
(see "HOW TO RESOLVE CONFLICTS" section below). - <commit>…
-
Commits, usually other branch heads, to merge into our branch. Specifying more than one commit will create a merge with more than two parents (affectionately called an Octopus merge).
If no commit is given from the command line, merge the remote-tracking branches that the current branch is configured to use as its upstream. See also the configuration section of this manual page.
When
FETCH_HEAD
(and no other commit) is specified, the branches recorded in the.git/FETCH_HEAD
file by the previous invocation ofgit fetch
for merging are merged to the current branch.
PRE-MERGE CHECKS
Before applying outside changes, you should get your own work in
good shape and committed locally, so it will not be clobbered if
there are conflicts. See also git-stash[1].
git pull
and git merge
will stop without doing anything when
local uncommitted changes overlap with files that git pull
/git
merge
may need to update.
To avoid recording unrelated changes in the merge commit,
git pull
and git merge
will also abort if there are any changes
registered in the index relative to the HEAD
commit. (Special
narrow exceptions to this rule may exist depending on which merge
strategy is in use, but generally, the index must match HEAD.)
If all named commits are already ancestors of HEAD
, git merge
will exit early with the message "Already up to date."
FAST-FORWARD MERGE
Often the current branch head is an ancestor of the named commit.
This is the most common case especially when invoked from git
pull
: you are tracking an upstream repository, you have committed
no local changes, and now you want to update to a newer upstream
revision. In this case, a new commit is not needed to store the
combined history; instead, the HEAD
(along with the index) is
updated to point at the named commit, without creating an extra
merge commit.
This behavior can be suppressed with the --no-ff
option.
TRUE MERGE
Except in a fast-forward merge (see above), the branches to be merged must be tied together by a merge commit that has both of them as its parents.
A merged version reconciling the changes from all branches to be
merged is committed, and your HEAD
, index, and working tree are
updated to it. It is possible to have modifications in the working
tree as long as they do not overlap; the update will preserve them.
When it is not obvious how to reconcile the changes, the following happens:
-
The
HEAD
pointer stays the same. -
The
MERGE_HEAD
ref is set to point to the other branch head. -
Paths that merged cleanly are updated both in the index file and in your working tree.
-
For conflicting paths, the index file records up to three versions: stage 1 stores the version from the common ancestor, stage 2 from
HEAD
, and stage 3 fromMERGE_HEAD
(you can inspect the stages withgit ls-files -u
). The working tree files contain the result of the merge operation; i.e. 3-way merge results with familiar conflict markers<<<
===
>>>
. -
A ref named
AUTO_MERGE
is written, pointing to a tree corresponding to the current content of the working tree (including conflict markers for textual conflicts). Note that this ref is only written when the ort merge strategy is used (the default). -
No other changes are made. In particular, the local modifications you had before you started merge will stay the same and the index entries for them stay as they were, i.e. matching
HEAD
.
If you tried a merge which resulted in complex conflicts and
want to start over, you can recover with git merge --abort
.
MERGING TAG
When merging an annotated (and possibly signed) tag, Git always creates a merge commit even if a fast-forward merge is possible, and the commit message template is prepared with the tag message. Additionally, if the tag is signed, the signature check is reported as a comment in the message template. See also git-tag[1].
When you want to just integrate with the work leading to the commit that happens to be tagged, e.g. synchronizing with an upstream release point, you may not want to make an unnecessary merge commit.
In such a case, you can "unwrap" the tag yourself before feeding it
to git merge
, or pass --ff-only
when you do not have any work on
your own. e.g.
git fetch origin git merge v1.2.3^0 git merge --ff-only v1.2.3
HOW CONFLICTS ARE PRESENTED
During a merge, the working tree files are updated to reflect the result of the merge. Among the changes made to the common ancestor’s version, non-overlapping ones (that is, you changed an area of the file while the other side left that area intact, or vice versa) are incorporated in the final result verbatim. When both sides made changes to the same area, however, Git cannot randomly pick one side over the other, and asks you to resolve it by leaving what both sides did to that area.
By default, Git uses the same style as the one used by the "merge" program from the RCS suite to present such a conflicted hunk, like this:
Here are lines that are either unchanged from the common ancestor, or cleanly resolved because only one side changed, or cleanly resolved because both sides changed the same way. <<<<<<< yours:sample.txt Conflict resolution is hard; let's go shopping. ======= Git makes conflict resolution easy. >>>>>>> theirs:sample.txt And here is another line that is cleanly resolved or unmodified.
The area where a pair of conflicting changes happened is marked with markers
<<<<<<<
, =======
, and >>>>>>>
. The part before the =======
is typically your side, and the part afterwards is typically their side.
The default format does not show what the original said in the conflicting area. You cannot tell how many lines are deleted and replaced with Barbie’s remark on your side. The only thing you can tell is that your side wants to say it is hard and you’d prefer to go shopping, while the other side wants to claim it is easy.
An alternative style can be used by setting the merge.conflictStyle
configuration variable to either "diff3" or "zdiff3". In "diff3"
style, the above conflict may look like this:
Here are lines that are either unchanged from the common ancestor, or cleanly resolved because only one side changed, <<<<<<< yours:sample.txt or cleanly resolved because both sides changed the same way. Conflict resolution is hard; let's go shopping. ||||||| base:sample.txt or cleanly resolved because both sides changed identically. Conflict resolution is hard. ======= or cleanly resolved because both sides changed the same way. Git makes conflict resolution easy. >>>>>>> theirs:sample.txt And here is another line that is cleanly resolved or unmodified.
while in "zdiff3" style, it may look like this:
Here are lines that are either unchanged from the common ancestor, or cleanly resolved because only one side changed, or cleanly resolved because both sides changed the same way. <<<<<<< yours:sample.txt Conflict resolution is hard; let's go shopping. ||||||| base:sample.txt or cleanly resolved because both sides changed identically. Conflict resolution is hard. ======= Git makes conflict resolution easy. >>>>>>> theirs:sample.txt And here is another line that is cleanly resolved or unmodified.
In addition to the <<<<<<<
, =======
, and >>>>>>>
markers, it uses
another |||||||
marker that is followed by the original text. You can
tell that the original just stated a fact, and your side simply gave in to
that statement and gave up, while the other side tried to have a more
positive attitude. You can sometimes come up with a better resolution by
viewing the original.
HOW TO RESOLVE CONFLICTS
After seeing a conflict, you can do two things:
-
Decide not to merge. The only clean-ups you need are to reset the index file to the
HEAD
commit to reverse 2. and to clean up working tree changes made by 2. and 3.;git merge --abort
can be used for this. -
Resolve the conflicts. Git will mark the conflicts in the working tree. Edit the files into shape and
git add
them to the index. Usegit commit
orgit merge --continue
to seal the deal. The latter command checks whether there is a (interrupted) merge in progress before callinggit commit
.
You can work through the conflict with a number of tools:
-
Use a mergetool.
git mergetool
to launch a graphical mergetool which will work through the merge with you. -
Look at the diffs.
git diff
will show a three-way diff, highlighting changes from both theHEAD
andMERGE_HEAD
versions.git diff AUTO_MERGE
will show what changes you’ve made so far to resolve textual conflicts. -
Look at the diffs from each branch.
git log --merge -p <path>
will show diffs first for theHEAD
version and then theMERGE_HEAD
version. -
Look at the originals.
git show :1:filename
shows the common ancestor,git show :2:filename
shows theHEAD
version, andgit show :3:filename
shows theMERGE_HEAD
version.
EXAMPLES
-
Merge branches
fixes
andenhancements
on top of the current branch, making an octopus merge:$ git merge fixes enhancements
-
Merge branch
obsolete
into the current branch, usingours
merge strategy:$ git merge -s ours obsolete
-
Merge branch
maint
into the current branch, but do not make a new commit automatically:$ git merge --no-commit maint
This can be used when you want to include further changes to the merge, or want to write your own merge commit message.
You should refrain from abusing this option to sneak substantial changes into a merge commit. Small fixups like bumping release/version name would be acceptable.
MERGE STRATEGIES
The merge mechanism (git merge
and git pull
commands) allows the
backend merge strategies to be chosen with -s
option. Some strategies
can also take their own options, which can be passed by giving -X<option>
arguments to git merge
and/or git pull
.
- ort
-
This is the default merge strategy when pulling or merging one branch. This strategy can only resolve two heads using a 3-way merge algorithm. When there is more than one common ancestor that can be used for 3-way merge, it creates a merged tree of the common ancestors and uses that as the reference tree for the 3-way merge. This has been reported to result in fewer merge conflicts without causing mismerges by tests done on actual merge commits taken from Linux 2.6 kernel development history. Additionally this strategy can detect and handle merges involving renames. It does not make use of detected copies. The name for this algorithm is an acronym ("Ostensibly Recursive’s Twin") and came from the fact that it was written as a replacement for the previous default algorithm,
recursive
.The ort strategy can take the following options:
- ours
-
This option forces conflicting hunks to be auto-resolved cleanly by favoring our version. Changes from the other tree that do not conflict with our side are reflected in the merge result. For a binary file, the entire contents are taken from our side.
This should not be confused with the ours merge strategy, which does not even look at what the other tree contains at all. It discards everything the other tree did, declaring our history contains all that happened in it.
- theirs
-
This is the opposite of ours; note that, unlike ours, there is no theirs merge strategy to confuse this merge option with.
- ignore-space-change
- ignore-all-space
- ignore-space-at-eol
- ignore-cr-at-eol
-
Treats lines with the indicated type of whitespace change as unchanged for the sake of a three-way merge. Whitespace changes mixed with other changes to a line are not ignored. See also git-diff[1]
-b
,-w
,--ignore-space-at-eol
, and--ignore-cr-at-eol
.-
If their version only introduces whitespace changes to a line, our version is used;
-
If our version introduces whitespace changes but their version includes a substantial change, their version is used;
-
Otherwise, the merge proceeds in the usual way.
-
- renormalize
-
This runs a virtual check-out and check-in of all three stages of a file when resolving a three-way merge. This option is meant to be used when merging branches with different clean filters or end-of-line normalization rules. See "Merging branches with differing checkin/checkout attributes" in gitattributes[5] for details.
- no-renormalize
-
Disables the
renormalize
option. This overrides themerge.renormalize
configuration variable. - find-renames[=<n>]
-
Turn on rename detection, optionally setting the similarity threshold. This is the default. This overrides the merge.renames configuration variable. See also git-diff[1]
--find-renames
. - rename-threshold=<n>
-
Deprecated synonym for
find-renames=<n>
. - subtree[=<path>]
-
This option is a more advanced form of subtree strategy, where the strategy makes a guess on how two trees must be shifted to match with each other when merging. Instead, the specified path is prefixed (or stripped from the beginning) to make the shape of two trees to match.
- recursive
-
This can only resolve two heads using a 3-way merge algorithm. When there is more than one common ancestor that can be used for 3-way merge, it creates a merged tree of the common ancestors and uses that as the reference tree for the 3-way merge. This has been reported to result in fewer merge conflicts without causing mismerges by tests done on actual merge commits taken from Linux 2.6 kernel development history. Additionally this can detect and handle merges involving renames. It does not make use of detected copies. This was the default strategy for resolving two heads from Git v0.99.9k until v2.33.0.
The recursive strategy takes the same options as ort. However, there are three additional options that ort ignores (not documented above) that are potentially useful with the recursive strategy:
- patience
-
Deprecated synonym for
diff-algorithm=patience
. - diff-algorithm=[patience|minimal|histogram|myers]
-
Use a different diff algorithm while merging, which can help avoid mismerges that occur due to unimportant matching lines (such as braces from distinct functions). See also git-diff[1]
--diff-algorithm
. Note thatort
specifically usesdiff-algorithm=histogram
, whilerecursive
defaults to thediff.algorithm
config setting. - no-renames
-
Turn off rename detection. This overrides the
merge.renames
configuration variable. See also git-diff[1]--no-renames
.
- resolve
-
This can only resolve two heads (i.e. the current branch and another branch you pulled from) using a 3-way merge algorithm. It tries to carefully detect criss-cross merge ambiguities. It does not handle renames.
- octopus
-
This resolves cases with more than two heads, but refuses to do a complex merge that needs manual resolution. It is primarily meant to be used for bundling topic branch heads together. This is the default merge strategy when pulling or merging more than one branch.
- ours
-
This resolves any number of heads, but the resulting tree of the merge is always that of the current branch head, effectively ignoring all changes from all other branches. It is meant to be used to supersede old development history of side branches. Note that this is different from the -Xours option to the recursive merge strategy.
- subtree
-
This is a modified
ort
strategy. When merging trees A and B, if B corresponds to a subtree of A, B is first adjusted to match the tree structure of A, instead of reading the trees at the same level. This adjustment is also done to the common ancestor tree.
With the strategies that use 3-way merge (including the default, ort), if a change is made on both branches, but later reverted on one of the branches, that change will be present in the merged result; some people find this behavior confusing. It occurs because only the heads and the merge base are considered when performing a merge, not the individual commits. The merge algorithm therefore considers the reverted change as no change at all, and substitutes the changed version instead.
CONFIGURATION
Everything above this line in this section isn’t included from the git-config[1] documentation. The content that follows is the same as what’s found there:
- merge.conflictStyle
-
Specify the style in which conflicted hunks are written out to working tree files upon merge. The default is "merge", which shows a
<<<<<<<
conflict marker, changes made by one side, a=======
marker, changes made by the other side, and then a>>>>>>>
marker. An alternate style, "diff3", adds a|||||||
marker and the original text before the=======
marker. The "merge" style tends to produce smaller conflict regions than diff3, both because of the exclusion of the original text, and because when a subset of lines match on the two sides, they are just pulled out of the conflict region. Another alternate style, "zdiff3", is similar to diff3 but removes matching lines on the two sides from the conflict region when those matching lines appear near either the beginning or end of a conflict region. - merge.defaultToUpstream
-
If merge is called without any commit argument, merge the upstream branches configured for the current branch by using their last observed values stored in their remote-tracking branches. The values of the
branch.<current branch>.merge
that name the branches at the remote named bybranch.<current branch>.remote
are consulted, and then they are mapped viaremote.<remote>.fetch
to their corresponding remote-tracking branches, and the tips of these tracking branches are merged. Defaults to true. - merge.ff
-
By default, Git does not create an extra merge commit when merging a commit that is a descendant of the current commit. Instead, the tip of the current branch is fast-forwarded. When set to
false
, this variable tells Git to create an extra merge commit in such a case (equivalent to giving the--no-ff
option from the command line). When set toonly
, only such fast-forward merges are allowed (equivalent to giving the--ff-only
option from the command line). - merge.verifySignatures
-
If true, this is equivalent to the --verify-signatures command line option. See git-merge[1] for details.
- merge.branchdesc
-
In addition to branch names, populate the log message with the branch description text associated with them. Defaults to false.
- merge.log
-
In addition to branch names, populate the log message with at most the specified number of one-line descriptions from the actual commits that are being merged. Defaults to false, and true is a synonym for 20.
- merge.suppressDest
-
By adding a glob that matches the names of integration branches to this multi-valued configuration variable, the default merge message computed for merges into these integration branches will omit "into <branch name>" from its title.
An element with an empty value can be used to clear the list of globs accumulated from previous configuration entries. When there is no
merge.suppressDest
variable defined, the default value ofmaster
is used for backward compatibility. - merge.renameLimit
-
The number of files to consider in the exhaustive portion of rename detection during a merge. If not specified, defaults to the value of diff.renameLimit. If neither merge.renameLimit nor diff.renameLimit are specified, currently defaults to 7000. This setting has no effect if rename detection is turned off.
- merge.renames
-
Whether Git detects renames. If set to "false", rename detection is disabled. If set to "true", basic rename detection is enabled. Defaults to the value of diff.renames.
- merge.directoryRenames
-
Whether Git detects directory renames, affecting what happens at merge time to new files added to a directory on one side of history when that directory was renamed on the other side of history. If merge.directoryRenames is set to "false", directory rename detection is disabled, meaning that such new files will be left behind in the old directory. If set to "true", directory rename detection is enabled, meaning that such new files will be moved into the new directory. If set to "conflict", a conflict will be reported for such paths. If merge.renames is false, merge.directoryRenames is ignored and treated as false. Defaults to "conflict".
- merge.renormalize
-
Tell Git that canonical representation of files in the repository has changed over time (e.g. earlier commits record text files with CRLF line endings, but recent ones use LF line endings). In such a repository, Git can convert the data recorded in commits to a canonical form before performing a merge to reduce unnecessary conflicts. For more information, see section "Merging branches with differing checkin/checkout attributes" in gitattributes[5].
- merge.stat
-
Whether to print the diffstat between ORIG_HEAD and the merge result at the end of the merge. True by default.
- merge.autoStash
-
When set to true, automatically create a temporary stash entry before the operation begins, and apply it after the operation ends. This means that you can run merge on a dirty worktree. However, use with care: the final stash application after a successful merge might result in non-trivial conflicts. This option can be overridden by the
--no-autostash
and--autostash
options of git-merge[1]. Defaults to false. - merge.tool
-
Controls which merge tool is used by git-mergetool[1]. The list below shows the valid built-in values. Any other value is treated as a custom merge tool and requires that a corresponding mergetool.<tool>.cmd variable is defined.
- merge.guitool
-
Controls which merge tool is used by git-mergetool[1] when the -g/--gui flag is specified. The list below shows the valid built-in values. Any other value is treated as a custom merge tool and requires that a corresponding mergetool.<guitool>.cmd variable is defined.
-
araxis
-
bc
-
codecompare
-
deltawalker
-
diffmerge
-
diffuse
-
ecmerge
-
emerge
-
examdiff
-
guiffy
-
gvimdiff
-
kdiff3
-
meld
-
nvimdiff
-
opendiff
-
p4merge
-
smerge
-
tkdiff
-
tortoisemerge
-
vimdiff
-
winmerge
-
xxdiff
-
- merge.verbosity
-
Controls the amount of output shown by the recursive merge strategy. Level 0 outputs nothing except a final error message if conflicts were detected. Level 1 outputs only conflicts, 2 outputs conflicts and file changes. Level 5 and above outputs debugging information. The default is level 2. Can be overridden by the
GIT_MERGE_VERBOSITY
environment variable. - merge.<driver>.name
-
Defines a human-readable name for a custom low-level merge driver. See gitattributes[5] for details.
- merge.<driver>.driver
-
Defines the command that implements a custom low-level merge driver. See gitattributes[5] for details.
- merge.<driver>.recursive
-
Names a low-level merge driver to be used when performing an internal merge between common ancestors. See gitattributes[5] for details.
GIT
Part of the git[1] suite