Setup and Config
Getting and Creating Projects
Branching and Merging
Sharing and Updating Projects
Inspection and Comparison
export CVS_SERVER="git cvsserver" cvs -d :ext:user@server/path/repo.git co <HEAD_name>
cvspserver stream tcp nowait nobody /usr/bin/git-cvsserver git-cvsserver pserver
git cvsserver [options] [pserver|server] [<directory> …]
All these options obviously only make sense if enforced by the server side. They have been implemented to resemble the git-daemon options as closely as possible.
- --base-path <path>
Prepend path to requested CVSROOT
Don’t allow recursing into subdirectories
Don’t check for
gitcvs.enabledin config. You also have to specify a list of allowed directories (see below) if you want to use this option.
Print version information and exit
Print usage information and exit
You can specify a list of allowed directories. If no directories are given, all are allowed. This is an additional restriction, gitcvs access still needs to be enabled by the
gitcvs.enabledconfig option unless --export-all was given, too.
This application is a CVS emulation layer for git.
It is highly functional. However, not all methods are implemented, and for those methods that are implemented, not all switches are implemented.
Testing has been done using both the CLI CVS client, and the Eclipse CVS plugin. Most functionality works fine with both of these clients.
Currently cvsserver works over SSH connections for read/write clients, and over pserver for anonymous CVS access.
CVS clients cannot tag, branch or perform GIT merges.
git-cvsserver maps GIT branches to CVS modules. This is very different from what most CVS users would expect since in CVS modules usually represent one or more directories.
If you are going to offer anonymous CVS access via pserver, add a line in /etc/inetd.conf like
cvspserver stream tcp nowait nobody git-cvsserver pserver
Note: Some inetd servers let you specify the name of the executable independently of the value of argv (i.e. the name the program assumes it was executed with). In this case the correct line in /etc/inetd.conf looks like
cvspserver stream tcp nowait nobody /usr/bin/git-cvsserver git-cvsserver pserver
No special setup is needed for SSH access, other than having GIT tools in the PATH. If you have clients that do not accept the CVS_SERVER environment variable, you can rename git-cvsserver to
Note: Newer CVS versions (>= 1.12.11) also support specifying CVS_SERVER directly in CVSROOT like
cvs -d ":ext;CVS_SERVER=git cvsserver:user@server/path/repo.git" co <HEAD_name>
This has the advantage that it will be saved in your CVS/Root files and you don’t need to worry about always setting the correct environment variable. SSH users restricted to git-shell don’t need to override the default with CVS_SERVER (and shouldn’t) as git-shell understands
cvsto mean git-cvsserver and pretends that the other end runs the real cvs better.
For each repo that you want accessible from CVS you need to edit config in the repo and add the following section.
[gitcvs] enabled=1 # optional for debugging logfile=/path/to/logfile
Note: you need to ensure each user that is going to invoke git-cvsserver has write access to the log file and to the database (see Database Backend. If you want to offer write access over SSH, the users of course also need write access to the git repository itself.
You also need to ensure that each repository is "bare" (without a git index file) for
cvs committo work. See gitcvs-migration.
All configuration variables can also be overridden for a specific method of access. Valid method names are "ext" (for SSH access) and "pserver". The following example configuration would disable pserver access while still allowing access over SSH.
[gitcvs] enabled=0 [gitcvs "ext"] enabled=1
If you didn’t specify the CVSROOT/CVS_SERVER directly in the checkout command, automatically saving it in your CVS/Root files, then you need to set them explicitly in your environment. CVSROOT should be set as per normal, but the directory should point at the appropriate git repo. As above, for SSH clients not restricted to git-shell, CVS_SERVER should be set to git-cvsserver.
export CVSROOT=:ext:user@server:/var/git/project.git export CVS_SERVER="git cvsserver"
For SSH clients that will make commits, make sure their server-side .ssh/environment files (or .bashrc, etc., according to their specific shell) export appropriate values for GIT_AUTHOR_NAME, GIT_AUTHOR_EMAIL, GIT_COMMITTER_NAME, and GIT_COMMITTER_EMAIL. For SSH clients whose login shell is bash, .bashrc may be a reasonable alternative.
Clients should now be able to check out the project. Use the CVS module name to indicate what GIT head you want to check out. This also sets the name of your newly checked-out directory, unless you tell it otherwise with
-d <dir_name>. For example, this checks out master branch to the
cvs co -d project-master master
git-cvsserver uses one database per git head (i.e. CVS module) to store information about the repository for faster access. The database doesn’t contain any persistent data and can be completely regenerated from the git repository at any time. The database needs to be updated (i.e. written to) after every commit.
If the commit is done directly by using
git (as opposed to
using git-cvsserver) the update will need to happen on the
next repository access by git-cvsserver, independent of
access method and requested operation.
That means that even if you offer only read access (e.g. by using the pserver method), git-cvsserver should have write access to the database to work reliably (otherwise you need to make sure that the database is up-to-date any time git-cvsserver is executed).
By default it uses SQLite databases in the git directory, named
gitcvs.<module_name>.sqlite. Note that the SQLite backend creates
temporary files in the same directory as the database file on
write so it might not be enough to grant the users using
git-cvsserver write access to the database file without granting
them write access to the directory, too.
You can configure the database backend with the following configuration variables:
git-cvsserver uses the Perl DBI module. Please also read
its documentation if changing these variables, especially
Database name. The exact meaning depends on the selected database driver, for SQLite this is a filename. Supports variable substitution (see below). May not contain semicolons (
;). Default: %Ggitcvs.%m.sqlite
Used DBI driver. You can specify any available driver for this here, but it might not work. cvsserver is tested with DBD::SQLite, reported to work with DBD::Pg, and reported not to work with DBD::mysql. Please regard this as an experimental feature. May not contain colons (
:). Default: SQLite
Database user. Only useful if setting
dbdriver, since SQLite has no concept of database users. Supports variable substitution (see below).
Database password. Only useful if setting
dbdriver, since SQLite has no concept of database passwords.
Database table name prefix. Supports variable substitution (see below). Any non-alphabetic characters will be replaced with underscores.
All variables can also be set per access method, see above.
dbuser you can use the following variables:
git directory name
git directory name, where all characters except for alpha-numeric ones,
-are replaced with
_(this should make it easier to use the directory name in a filename if wanted)
CVS module/git head name
access method (one of "ext" or "pserver")
Name of the user running git-cvsserver. If no name can be determined, the numeric uid is used.
To get a checkout with the Eclipse CVS client:
Select "Create a new project → From CVS checkout"
Create a new location. See the notes below for details on how to choose the right protocol.
Browse the modules available. It will give you a list of the heads in the repository. You will not be able to browse the tree from there. Only the heads.
Pick HEAD when it asks what branch/tag to check out. Untick the "launch commit wizard" to avoid committing the .project file.
Protocol notes: If you are using anonymous access via pserver, just select that. Those using SSH access should choose the ext protocol, and configure ext access on the Preferences→Team→CVS→ExtConnection pane. Set CVS_SERVER to "git cvsserver". Note that password support is not good when using ext, you will definitely want to have SSH keys setup.
Alternatively, you can just use the non-standard extssh protocol that Eclipse
offer. In that case CVS_SERVER is ignored, and you will have to replace
the cvs utility on the server with git-cvsserver or manipulate your
so that calling cvs effectively calls git-cvsserver.
CVS 1.12.9 on Debian
CVS 1.11.17 on MacOSX (from Fink package)
Eclipse 3.0, 3.1.2 on MacOSX (see Eclipse CVS Client Notes)
All the operations required for normal use are supported, including checkout, diff, status, update, log, add, remove, commit. Legacy monitoring operations are not supported (edit, watch and related). Exports and tagging (tags and branches) are not supported at this stage.
By default the server leaves the -k mode blank for all files, which causes the cvs client to treat them as a text files, subject to crlf conversion on some platforms.
You can make the server use
crlf attributes to set the -k modes
for files by setting the
gitcvs.usecrlfattr config variable.
In this case, if
crlf is explicitly unset (-crlf), then the
server will set -kb mode for binary files. If
crlf is set,
then the -k mode will explicitly be left blank. See
also gitattributes for more information about the
gitcvs.usecrlfattr config is not enabled
or if the
crlf attribute is unspecified for a filename, then
the server uses the
gitcvs.allbinary config for the default setting.
gitcvs.allbinary is set, then file not otherwise
specified will default to -kb mode. Otherwise the -k mode
is left blank. But if
gitcvs.allbinary is set to "guess", then
the correct -k mode will be guessed based on the contents of
For best consistency with cvs, it is probably best to override the
defaults by setting
gitcvs.usecrlfattr to true,
gitcvs.allbinary to "guess".
Part of the git suite